Icom IC-M506EURO#25 VHF Marine fixed transceiver with 25W of RF output power, DSC class D, AIS and NMEA 2000 connectivity
Icom IC-M506EURO #25 VHF MARINE TRANSCEIVER WITH AIS RX
- 2 Minutes Last Call Voice Recording
- Superb Active Noise Cancelling
- IPX8 Advanced Waterproofing (1m depth water for 60 minutes)
- New Intuitive User Interface
- Large Dot-Matrix Display (132 × 96 pixels)
- Optional COMMANDMIC™ HM-195B/SW for 2nd Station/Intercom
- Built-in Class D DSC (Meets ITU-R M493-13)
- 25W Two-Way Hailer and Horn
- Integrated AIS Receiver
- NMEA 2000™ Connectivity
Integrated AIS Receiver
With an integrated AIS receiver, the ICM506EURO can show AIS vessel traffic information on the display. The AIS target call function allows you to easily set up an individual DSC call. The Plotter, Target list and Danger list can be toggled on the display.
With the plug-and-play functionality of NMEA 2000, the IC-M506EURO can easily connect to a NMEA 2000 network and inter-connect with other equipment.
Last Call Voice Recording
The last call voice recording function automatically saves the last two minutes of the last incoming call. You can replay the received call, and not miss any incoming call.
Superb Active Noise Cancelling
Using the digital signal processing technology, the built-in bidirectional active noise
cancelling provides superb performance. It reduces background noise to up to 90% in the received signal, while 30% fi xed in the transmitting signal. The function OFF setting is also possible.
Intuitive User Interface
The intuitive software key functions provide easy and fast operation to control the multiple functions of the IC-M506EURO. The 132×96 pixels dot-matrix display is larger than the
IC-M505 (128×64 pixels). Reading GPS, AIS, DSC and radio menus are easier than ever.
Optional COMMANDMIC™ HM-195B/SW
The optional COMMANDMIC, HM-195B/SW provides 2nd station capability for using the IC-M506EURO from a separate cabin or tower. Most functions including DSC and AIS functions can be controlled from the COMMANDMIC and can be used as an intercom between the IC-M506EURO and the COMMANDMIC.
IPX8 Advanced Waterproofing
The IC-M506EURO has been tested to survive after being submersed in 1m (3.2ft) depth of water for 60 minutes.
25W Two-Way Hailer
When connected to an external hailer horn, you can talk to people on the deck or shore
from the radio’s microphone and can hear people’s reply via the hailer speaker. Horn and RX hailer functions are also available.
Supplied accessories: Power cable, mounting bracket, microphone / speaker HM-205B, bracket microphone, screws and user manual.
In compliance with the essential requirements and other relevant provisions of Directive 1999/5/CE:
EN 301 025-2 V1.4.1 (2010-09);
EN 301 025-3 V1.4.1 (2010-09); EN 300 698-2 V1.2.1(2009-12);
EN 300 698-3 V1.2.1 (2009-12); EN 301 843-2 V1.2.1 (2004-6);
EN 60950-1 (2006/A1:2010); EN 62311:2008;
EN 300 338-1 V1.3.1(2010-02);
EN 300 338-3 V1.1.1(2010-02)
MINISTERIAL APPROVAL n. 0019026 (March 24, 2014)
RX: 156.000–163.425 MHz
Ch 70: 156.525 MHz
AIS 1/2: 161.975MHz, 162.025MHz
Type of emission: 16K0G3E (FM), 16K0G2B (DCS)
Power supply: 13.8V DC nominal (10.8–15.6V DC)
Current drain: Tx 25W output 5.5 A
Rx AF Max. (RX hailer ON) 5.0A (with External speaker)
Operating temperature: -20°C to +60°C
Antenna impedance: 50 Ω (SO-239)
Dimensions (W×H×D):178.9×113.9×113.8 mm
NMEA 0183 in/out formats: RMC, GGA, GNS, GLL, DSC, DSE
(at 13.8V DC): 25W, 1W
Max. deviation: ± 5 kHz
Frequency stability: < ± 1.5kHz
Spurious emissions: < 0,25 µW
Residual modulation: > 40 dB
Adjacent channel power: > 70 dB
Intermediate frequency: 1st 30.15MHz, 2nd 450kHz
Ch 70: 1st 21.7MHz, 2nd 450kHz
Sensitivity: -5dBµ emf typ. (20dB SINAD)
Adjacent ch. selectivity: Main > 75dB
Ch 70 > 73dBµ emf (1% BER)
Spurious response: Main > 75dB
Ch 70 > 73dBµ emf (1% BER)
Intermodulation: Main > 75dB
Ch 70 > 68dBµ emf (1% BER)
Hum and noise: > 40 dB
Audio output power: 10W min. with a 4O load (External speaker)
Applicable IP Rating
Water: IPX8 (1 m depth water for 60 minutes)