This product is a blend of organic solvents specifically designed for thinning and/or equipment cleaning with Interspray 900, Interprime 880,
Interprime 820 and Polyurethane Basecoat (not available in North America) for spray applications. For spray applications use in the approximate temperature range of 10-15°C.
Thinner 910 can be blended with other Interspray solvents to facilitate spraying over a range of temperatures for optimum results.
For further details consult the Interspray Application Manual.
PRODUCT INFORMATION
Specific Gravity 0.824
Volume Solids 0%
Typical Shelf Life 2 yrs
VOC (As Supplied) 824 g/lt
Unit Size 1 Lt (Eu only), 5 Lt
DRYING/OVERCOATING INFORMATION
Drying
Overcoating
Substrate Temperature
5°C (41°F) 10°C (50°F) 23°C (73°F) 35°C (95°F)
Overcoated By Min Max Min Max Min Max Min Max
APPLICATION AND USE
Method: When using for surface wipe down, turn the cloth frequently to avoid re-applying residues. For application of the initial coat of Interspray 900 at 10-15°C, thin 25-35%.
For application of subsequent coats of Interspray 900, thin 35%.
Tips: Ventilation and Humidity Control: Ensure adequate ventilation during use.
Some important points: No special restrictions.
Compatibility/Substrates
Suitable for spray application of International's professional polyurethane topcoat/undercoat, epoxy primer and sprayable fairing compound.
TRANSPORTATION, STORAGE AND SAFETY INFORMATION
GENERAL INFORMATION
Exposure to air and extremes of temperature should be avoided. For the full shelf life of this product to be realised ensure that between uses the container is firmly closed and the temperature is between 5°C/41°F and 35°C/95°F. Keep out of direct sunlight.
TRANSPORTATION
The product should be kept in securely closed containers during transport and storage.
Safety GENERAL
Read the label safety section for Health and Safety Information, also available from our Technical Help Line.
DISPOSAL
Do not discard tins or pour paint into water courses, use the facilities provided. It is best to allow paints to harden before disposal.
Remainders of Thinner 910 cannot be disposed of through the municipal waste route or dumped without permit. Disposal of remainders must be arranged for in consultation with the authorities.
IMPORTANT NOTES
The information given in this sheet is not intended to be exhaustive. Any person using the product without first making further written enquiries as to the suitability of the product for the intended purpose does so at his own risk.
Contents: 1000 ml.