Unit size 0.375 Lt. Black colour YBA067.
Reformulated to give improved protection and a brighter colour, Trilux 33 is a high performance brightly coloured antifouling. Formulated with Biolux Technology®, the slow polishing formula helps avoid paint build up and gives effective fouling protection for up to 18 months. PRODUCT DESCRIPTION
Suitable for all types of construction, including aluminium, Trilux 33 now has a lower VOC content that helps reduce environmental solvent emissions.
APPLICATION AND USE
MAJOR REFURBISHMENT: The first coat of Trilux 33 should always be applied over a recommended primer system. The primer surface should be dry and free of all contaminants (oil, grease, salt etc) and overcoated with Trilux 33 within the overcoating interval specified for the primer.
REPAIR and UPGRADING APPROVED SYSTEMS: Degrease the surface. Clean the entire area with controlled high pressure washing (3000 psi./211 bar). Repair corroded areas with the recommended anticorrosive primer system (Primocon).
PRIMING: All preparation for bare substrates is covered on the appropriate primer datasheet.
BARE GRP: Gelshield 200 for osmosis protection, or Primocon.
STEEL/IRON: Prime with Interprotect or Primocon.
LEAD: Prime with Interprotect or Primocon.
WOOD: Prime with Interprotect or Primocon.
ALUMINIUM/ALLOY: Prime with Interprotect or Primocon.
Ensure the area is clean and dry. Apply Trilux 33 within the overcoating intervals specified by the primer. Apply an extra stripe coat in areas of high wear such as chines, rudders, sterngear and any leading edges.
Note: Maximum Time to Immersion is 1 month. If coating is left for more than 1 month, the surface should be high pressure fresh water washed or wet abraded using 180-240 grade paper prior to immersion.
Useful tips: Mixing: Stir well before use.
Thinning is not recommended. Use in exceptional circumstances only. For example, extremes of weather.
Cleaner: Thinners No.3
Airless Spray Pressure: 176-210 bar. Tip Size: 2180. - For Professional use ONLY.
Other: Take care to apply all the paint calculated even if it means applying an extra coat. It is important for performance to apply the correct thickness.
Some Important Points: If Trilux 33 is exposed for any period of time, e.g. over the winter, it must be high pressure fresh water washed before being immersed.
Product temperature should be minimum 5°C/41°F and maximum 35°C/95°F.
Ambient temperature should be minimum 5°C/41°F and maximum 35°C/95°F.
Substrate temperature should be 3°C/5°F above dew point and maximum 35°C/95°F.
Compatibility/Substrates: Suitable for use on all substrates including suitably primed Aluminium/Alloy and Zinc-sprayed metals. Can be applied direct over most types of antifoulings, provided they are in sound condition Prime non-antifoulings with Primocon, Intertuf 203 or Interprotect. For further details on compatibility consult International Technical Representatives.
Number of Coats: 2 by airless spray, 3 by roller.
Coverage (Practical) - 4.3 m²/lt by spray, 8.3 m²/lt by roller.
Recommended DFT per coat 90 microns dry by spray, 60 microns dry by roller.
Recommended WFT per coat 164 microns wet by spray, 109 microns by roller.
Airless Spray, Brush, Roller. Spray application is recommended only for Professional Applicators that have all the proper safety equipment including a full-face shield.