VC® General Thinner is specifically formulated to dilute all VC® products where necessary and to clean equipment.

MORE INFORMATION
VC General Thinner is suitable for thinning all VC products when necessary and for cleaning equipment. It can dissolve VC17m and may be used to remove VC17m if necessary. For our codes COL300, COL301, COL302, COL303, COL308, COL309, COL310, COL311, COL312, COL313.

PRODUCT INFORMATION

Colour YTA006 

Specific Gravity 0.892

Volume Solids 0%

Typical Shelf Life 2 yrs

VOC 892 g/lt

Unit Size 1 Lt

DRYING/OVERCOATING INFORMATION

Drying

Overcoating

Substrate Temperature
5°C (41°F)  10°C (50°F)  23°C (73°F)  35°C (95°F) 

Overcoating By Min Max Min Max Min Max Min Max

APPLICATION AND USE

Method:  For surface cleaning, turn the cloth frequently to avoid spreading residues.
Ventilation and Humidity Control: Ensure adequate ventilation during use.

Some Important Points:  No special restrictions.

Compatibility/Substrates:
Suitable for use with all VC products.

TRANSPORTATION, STORAGE AND SAFETY INFORMATION
Storage GENERAL INFORMATION:

Exposure to air and extremes of temperature should be avoided. For the full shelf life of this product, close the container firmly between uses and ensure that the temperature is between 5°C/41°F and 35°C/95°F. Keep out of direct sunlight.

TRANSPORTATION:

The product should be kept in securely closed containers during transport and storage.
Safety:
GENERAL: Read the label safety section for Health and Safety Information.

DISPOSAL: Do not discard tins or pour paint into water courses, use the facilities provided. It is best to allow paints to harden before disposal.
VC General Thinner residue cannot be disposed of through the municipal waste route without prior permission.

IMPORTANT NOTES The information given in this sheet is not intended to be exhaustive. Any person using the product without first making further written enquiries as to the suitability of the product for the intended purpose does so at his own risk.