GEL GLOSS PRO ENAMEL
A high quality enamel with excellent resistance to marine and industrial environment, to aging and to ultraviolet rays. Does not yellow, is very flexible and retains its gloss.
Excellent expansion for a better aesthetic appearance of topsides, decks, superstructures with specular and brilliant surfaces. Can be applied directly to gel coats or to epoxy or polyurethane Plastolite Pro (our code COL222, COL2222), Polyrex Pro (our code COL208, COL209). A wide range of colours, which can be blended, is available. Not suitable for continuous water immersion.
For colour blending for brush application, kindly contact the technical office of Veneziani Paints.
Application of 2 coats is recommended (3 for better coverage).
Theoretical yield 13.5 sqm/Lt.
Specific gravity 1.29.
Minimum drying time prior to recoating 7 hours at 20°C.
Recommended thinner is 6700, our code COL255, for spray application;
For roller or brush applicatoin, recommended thinner 5780, our code COL252.
Not suitable for continuous immersion in water.
Unit size 0.75 lt.
Specific weight: 1.29 ± 0.02 Kg / L
Solids by volume: 54%
Colour: refer to colour chart
Unit size: 0,75 L / 2,50 L
APPLICATION Apply with: brush - roller - conventional - airless spray
Drying time at 20°C: 7 hours
Pot life (20 ° C): 3-4 hours
Mixing ratio by volume: 3: 1
Ratio by weight: 80: 20
Thinner: 6700 (Spray - Airless) or 6780 (roller - brush)
Thickness dry film per coat: 35-40 μ
Theoretical coverage per coat: from 15.4 to 13.5 m2 / L
Recoating time at 20°C: min 3-4 hours max 48 hours
Number of coats: 2 (3 for more coverage )
- GREAT EXPANSION SPRAY AND BRUSH
- EXCELLENT MECHANICAL AND CHEMICAL RESISTANCE
- MAINTAINS ITS GLOSS
- GOOD COVERAGE
- POSSIBILITY TO BLEND WITH OTHER COLOURS
* NON-SLIP FINISH WITH ADDITIVE
Unit size 0,75Lt.
Cloud Grey colour 762.