International Thinner No.3 500ml #N702458COL6508

International Thinner No.3 500ml #N702458COL6508

International Thinner No.3 500ml #N702458COL6508

Thinner No.3 is suitable for thinning antifoulings, hull coating and other special paints such as Micron Extra, Micron CSC, Micron WQ, Cruiser Premium, Cruiser Superior, Cruiser,etc..
Price:
€9.57
Listing:
€12.75
You Save:
€3.18 (25%)

Description

PRODUCT DESCRIPTION
Thinner No.3 is suitable for thinning antifoulings, hull coating and other special paints such as   Micron Extra, Micron CSC, Micron WQ, Cruiser Premium, Cruiser Superior, Cruiser, Cruiser Future/Eco, Interspeed Extra Strong, Interspeed Ultra, Prima, Trilux, Soft Antifouling, Boatgard, Waterways, Fabi,CT Kobberstoff, Waterways Future/Fabi Eco, Veridian Tiecoat, Veridian Topcoat, Primocon,
Motorfarg and Interstrip AF. Suitable for equipment cleaning in association with all of the above products and also for Micron Optima, Micron Future/Eco and Lago Racing II.

PRODUCT INFORMATION

Colour: YTA085
Specific Gravity: 0.875
Volume Solids: 0%
Typical Shelf Life: 2 yrs
VOC (As Supplied): 875 g/lt

APPLICATION AND USE
Method: When using for surface wipe down, turn the cloth frequently to avoid spreading residues.

Useful Tips:
Ventilation and Humidity Control: Ensure adequate ventilation during use.
Some Important Points: No special restrictions.
Compatibility/Substrates:
Compatible with all International Antifoulings and coating of hulls as well as some other specialist products.
Thinner No. 3 can be used for spraying single pack varnishes and finishes.

TRANSPORTATION, STORAGE AND SAFETY INFORMATION
Storage GENERAL INFORMATION:
Exposure to air and extremes of temperature should be avoided. For the full shelf life of this product to be realised ensure that between uses the container is firmly closed and the temperature is between 5°C/41°F and 35°C/95°F. Keep out of direct sunlight.
TRANSPORTATION:
The product should be kept in securely closed containers during transport and storage.
Safety GENERAL: Read the label safety section for Health and Safety Information.
DISPOSAL: Do not discard tins or pour paint into water courses, use the facilities provided. It is best to allow paints to
harden before disposal.
Remainders of Thinner No.3 cannot be disposed of through the municipal waste route or dumped without permit.
Disposal of remainders must be arranged for in consultation with the authorities.

Unit size 0.5lt.