-
1
HEMPEL'S UNDERWATER PRIMER 26030 is a fast drying underwater primer containing aluminium flakes. For use as a sealer onto old antifouling or as a tiecoat over an epoxy primed surface before antifouling.
-
2
HEMPEL'S LIGHT PRIMER 45551 is a two component polyamide adduct cured epoxy high build paint. It forms a hard and tough coating resistant to water and petroleum products.
-
3
HEMPEL'S UNDERWATER PRIMER 26030 is a fast drying underwater primer containing aluminium flakes. For use as a sealer onto old antifouling or as a tiecoat over an epoxy primed surface before antifouling.
-
4
HEMPEL'S LIGHT PRIMER 45551 is a two component polyamide adduct cured epoxy high build paint. It forms a hard and tough coating resistant to water and petroleum products.
-
5
Two-component epoxy primer thick. It forms a hard, tough and resistant to water and petroleum products. Recommended as a primer above and below the waterline.
-
6
HEMPEL HIGH PROTECT is a two-component high build amine adduct epoxy primer, solvent-free. It forms a hard, tough and water-resistant coating.
-
7
HEMPEL HIGH PROTECT is a two-component high build amine adduct epoxy primer, solvent-free. It forms a hard, tough and water-resistant coating.
-
8
Hempel Light is a two-component polyamide adduct cured epoxy high build paint. It forms a hard and tough coating resistant to water and petroleum products.
-
9
Highly effective, solvent-based paint stripper, can be used on most surfaces painted or varnished with antifouling, one-pack products or varnishes, 2,5lt, clear.
-
10
Self polishing antifouling. It changes to its final colour after approximately 1 week of exposure to water. Due to its self-renewing effect this product maintains an effective bioactive surface during its entire service life. 2.5lt.
-
11
As an antifouling for boats of glass fibre, wood, plywood, steel and aluminium. For power boats and regatta yachts.
-
12
Hard matrix antifouling containing high performance TecCel forming a smooth low friction. For boats that need to increase performance and speed. Seasonal protection from fouling without chalking.
-
13
Hard matrix antifouling containing high performance TecCel forming a smooth low friction. For boats that need to increase performance and speed. Seasonal protection from fouling without chalking.
-
14
Hard matrix antifouling containing high performance TecCel forming a smooth low friction. For boats that need to increase performance and speed. Seasonal protection from fouling without chalking.
-
15
Hard matrix antifouling containing high performance TecCel forming a smooth low friction. For boats that need to increase performance and speed. Seasonal protection from fouling without chalking.
-
16
As an antifouling for boats of glass fibre, wood, plywood, steel and aluminium. For power boats and regatta yachts.
-
17
Hard matrix antifouling containing high performance TecCel forming a smooth low friction. For boats that need to increase performance and speed. Seasonal protection from fouling without chalking.
-
18
Hard matrix antifouling containing high performance TecCel forming a smooth low friction. For boats that need to increase performance and speed. Seasonal protection from fouling without chalking.
-
19
Hard matrix antifouling containing high performance TecCel forming a smooth low friction. For boats that need to increase performance and speed. Seasonal protection from fouling without chalking.
-
20
Hard matrix antifouling containing high performance TecCel forming a smooth low friction. For boats that need to increase performance and speed. Seasonal protection from fouling without chalking.
-
21
Self-polishing antifouling containing a combination of copper compounds and organic biocides. Changes to its final colour after about a week in immersion.
-
22
Self-polishing antifouling containing a combination of copper compounds and organic biocides. Changes to its final colour after about a week in immersion.
-
23
Self-polishing antifouling containing a combination of copper compounds and organic biocides. Changes to its final colour after about a week in immersion.
-
24
Self-polishing antifouling containing a combination of copper compounds and organic biocides. Changes to its final colour after about a week in immersion.
-
25
Self-polishing antifouling containing a combination of copper compounds and organic biocides. After approximately a week in the water, it will take on its final colour.
-
26
Self-polishing antifouling containing a combination of copper compounds and organic biocides. After approximately a week in the water, it will take on its final colour.
-
27
Self-polishing antifouling containing a combination of copper compounds and organic biocides. After approximately a week in the water, it will take on its final colour.
-
28
Self-polishing antifouling containing a combination of copper compounds and organic biocides. After approximately a week in the water, it will take on its final colour.
-
29
Self-polishing antifouling containing a combination of copper compounds and organic biocides. After about a week in immersion changes the final color.
-
30
Self-polishing antifouling containing a combination of copper compounds and organic biocides. After approximately a week in the water, it will take on its final colour.
-
31
Thinner for epoxy products.
-
32
Universal thinner for antifouling paint. Suitable for thinning any antifouling and/or equipment cleaning. Unit size 1 lt.
-
33
Ydra Marine Universal antifouling thinner 5Lt
