-
1
Steel helix wire flexible corrugated Rubber exhaust hose. For engine water and engine exhaust gas up to 100°C. ø Inner 50mm. ø Outer 60mm. Coil 10mt.
-
2
Steel helix wire flexible corrugated Rubber exhaust hose. For engine water and engine exhaust gas up to 100°C. ø Inner 40mm. ø Outer 48mm. Coil 10mt.
-
3
DMFIT Pipe for Cold Water. Ø 12mm. Spool 100m. Blue colour.
-
4
DMFIT Pipe for Hot Water. Ø 12mm. Spool 100m. Red colour.
-
5
BHF (Buzzi - Hi - Flow) thru hull scoop strainer. Section 2". Section being equal, the special profile of this thru hull scoop strainer allows for a water inlet volume 2.5 times as large as a traditional one.
-
6
Oval cockpit drain. Size: 92x190mm. Hose adaptor 38mm. Made of 316 stainless steel, fitted with removable grid.
-
7
45° cockpit drain. Ø 92mm. Hose adaptor 40mm. Made of AISI316 stainless steel. Fitted with check system: an inner ball prevents any backflow. Removable grid for cleaning.
-
8
Stainless steel ball valve - Thread D.2"
-
9
90° Skin Fittings. Thread 1" 1/2. For pipe Ø 51mm. Max hull thickness 25mm. Supplied with mirror polished ground connections.
-
10
3-way ball valve female/female/female. Thread 1". Made of AISI 316 stainless steel, deviation; fitted with handle lock. "T" maneuvering.
-
11
Thru hull scoop strainer. Thread 2”. Fitted with ground connection.
-
12
Skin fittings with scupper valves. Thread 2". Length under the head 100mm. Net passage Ø 42mm. Made of mirror polished AISI 316 stainless steel, fitted with rubber non-return valve and ground connection.
-
13
382 pieces of O-Rings of various sizes in inches. Professional quality.
Material: Nitrile NBR (Nitrile Butadene Rubber).
-
14
Stainless steel ball valve - Thread D.1-1/2"
-
15
Mirror polished stainless steel skin fittings with mirror polished ground connections, thread 2'', 95x84mm, Ø50mm.
-
16
90° Skin Fittings. Thread 1" 1/2. For pipe Ø 32mm. Max hull thickness 25mm. Supplied with mirror polished ground connections.
-
17
Fuel rubber hose suitable for loading diesel and unleaded fuel for marine pleasure craft inboard engines up to 24 mt lenght. According to ISO 7840:2013 and approved CE 0474 R.I.N.A. Sold by metre. Inner Ø30 mm. Outer Ø42 mm.
-
18
Fuel hose CE RINA approved - 50x64mm - Sold by meter
-
19
3-way ball valve female/female/female. Thread 3/4". Made of AISI 316 stainless steel, deviation; fitted with handle lock. "T" maneuvering.
-
20
90° Skin Fittings. Thread 1" 1/2. For pipe Ø 38mm. Max hull thickness 25mm. Supplied with mirror polished ground connections.
-
21
Stainless steel ball valve - Thread D.1-1/4"
-
22
Kit including 31 assorted clamps.
-
23
Thru hull scoop strainer. Thread 1 1/2”. Fitted with ground connection.
-
24
-
25
Skin fittings with scupper valves. Thread 1" 1/2. Length under the head 78mm. Net passage Ø 35mm. Made of mirror polished AISI 316 stainless steel, fitted with rubber non-return valve and ground connection.
-
26
Thru hull scoop strainer. Thread 1” 1/4. Fitted with ground connection.
-
27
Stainless Steel Skin Fittings with mirror polished ground connections, thread 1” 1/2, 80x71mm, Ø38mm.
-
28
Cockpit flush drain. Version: with hose connector. A= 75mm, B= 33mm, Ø C= 70mm, Ø D= 39mm, Ø E= 1" 1/2, Ø F= 45mm. Made of two chromed brass parts. Body and insert that works as a removable filter.
-
29
Cockpit drain. D - Inside thread 1"1/2. A= 80mm, BXC 50x38mm, E= 5,5mm. Made of mirror-polished AISI316 stainless steel. Snap upper grid for mounting and hiding the fastening screws.
-
30
3-way ball valve female/female/female. Thread 3/8". Made of AISI 316 stainless steel, deviation; fitted with handle lock. "T" maneuvering.
-
31
3-way ball valve female/female/female. Thread 1/2". Made of AISI 316 stainless steel, deviation; fitted with handle lock. "T" maneuvering.
-
32
Fuel hose CE RINA approved - 38x52mm - Sold by meter
-
33
Yellow brass thru hull threaded seacock - Thread D.2"
-
34
90° cockpit drain with check valve. Ø head 87mm. Hose adaptor 51mm. Body made of reinforced acetyl fibre. Head of AISI316 stainless steel and check flap.
-
35
90° cockpit drain with check valve. Ø head 87mm. Hose adaptor 38mm. Body made of reinforced acetyl fibre. Head of AISI316 stainless steel and check flap.
-
36
Cockpit flush drain. Version: with hose connector. A= 78mm, B= 36mm, Ø C= 65mm, Ø D= 33mm, Ø E= 1" 1/4, Ø F= 38mm. Made of two chromed brass parts. Body and insert that works as a removable filter.
-
37
Linear distribution manifolds. 6 outlets. Section - main line 1". Section - derivation 1/2". 30cm. Made of brass, centre-to-centre distance of 50 mm.
-
38
Brass ball valve - Thread D.1-1/2"
-
39
Whale vertical suction strainer black plastic with check valve, 147x56x104mm.
-
40
Thru hull scoop strainer. Thread 1”. Fitted with ground connection.
-
41
Steel helix wire flexible corrugated Rubber exhaust hose. For engine water and engine exhaust gas up to 100°C. ø Inner 45mm. ø Outer 53mm. Sold by meter.
-
42
Cockpit flush drain. Version: All thread. A= 80mm, B= 67mm, Ø C= 70mm, Ø D= 39mm, Ø E= 1" 1/2. Made of two chromed brass parts. Body and insert that works as a removable filter.
-
43
WHALE horizontal suction strainer black plastic with check valve, 170x120x58mm.
-
44
Shut-off full flow ball valve. Made-ready for bracket mounting, made of AISI 316 stainless steel. Thread D.1".
-
45
Mirror polished stainless steel skin fittings with mirror polished ground connections, thread 1” 1/4, 77x65mm, Ø34mm.
-
46
Thru-hull, water intake with strainer made of AISI 316 stainless steel, seawater resistant. Thread 3/4".
-
47
A1 fuel hose smooth. Section 25x35,5mm. Internal Ø 25mm. External Ø 37mm. Approximate weight 0,87g/m. Bend radius 250mm. Made in compliance with EC standards, RINA ISO 7840/2013 type-tested under class A1.
-
48
Rubber hose 60x70mm with RINA + LLOYD approval for exhaust gas systems, temperature from -25 ° to + 120 ° C. Sold by the meter.
