-
1
Hydrofix system brass joint 3/8" Female / Male Ø 15mm. Hydrofix plumbing connections, suitable for 70° max temperature. Immediate snap installation.
-
2
Set 10 pieces of Copper splicing joint timble for 8 mm wire rope.
-
3
Bilge strainer in marine bronze for bilge pump, equipped with a stainless steel net. Dimensions 97x55xh22 mm. Hose connector Ø16 mm.
-
4
Brass 90° Female-female pipe elbow. Thread 1"
-
5
1/2" female / male brass joint. Ø 15mm. Hydrofix plumbing connections, suitable for 70° max temperature. Immediate snap installation.
-
6
Female/Female Polypropylene Ball Valve - 1 1/2"
-
7
Brass ball valve - Thread D.1/2"
-
8
Made of clear PVC, fitted with steel spiral; very soft, no crushing, curves equal to the outer diameter; ideal for sea cocks.
-
9
White nylon seacocks with 90° elbow. Thread Ø1 inch. Hose connector Ø25 mm.
-
10
White nylon seacocks with 90° elbow. Thread Ø3/4 inches. Hose connector Ø19 mm.
-
11
Brass doublenipple. Thread 1" 1/2.
-
12
Brass 90° Male - Female pipe elbow. Thread 1".
-
13
Brass hose adaptor 90° male version Thread 1/4" Ø 10mm.
-
14
Brass hose adaptor 90° male version Thread 1/4" Ø 8mm.
-
15
3/8" Female / Female brass joint. Ø 15mm. Immediate snap installation. Hydrofix plumbing connections, suitable for 70° max temperature.
-
16
Heavy yellow brass washer. Thread Ø3/8 inches.
-
17
Chrome plated brass through deck fitting. Thread Ø3/8 inches. Pipe Ø15 mm.
-
18
Heavy brass washer drain. 3/8 inches thread.
-
19
Brass hose adaptor 90° male version Thread 3/4" Ø 25mm.
-
20
Female/Female Polypropylene Ball Valve - 1 1/4"
-
21
Stainless steel clamp for strong clamping with bolt closure. Heavy series. Dimensions 86-91 mm.
-
22
Flush head cockpit drain fitted with strainer net made of white nylon. Length 117 mm. Thread: Ø47 mm. Hose connector 32/38 mm.
-
23
It enables the fuel to flow through the tank-cockpit bulkhead. Hose adaptor: 10 mm. Material: brass.
-
24
Softwall rubber hot water hose suitable for hot water and non corrosive fluids and steam mix up to 120° C. Sold by the metre. Inner D.19 mm - 3/4".
-
25
Reduced Pipe Sleeves Female/Female. Size 1 x 1" 1/4.
-
26
White plastic Scupper 90° outlet 1"x25mm. Type 1”. Thread Ø 33mm. Length 42mm. Hose Adaptor 25mm.
-
27
Brass joint sleeves Female/Female. Thread 1" 1/4.
-
28
Hydrofix T Female - Female fitting. immediate snap instalation for hydraulic circuits, suitable for maximum temperature of 90° C. Ø 15mm.
-
29
White plastic scupper fitted with 90° hose adaptor. Outlet 1"x19mm. Type 1”. Thread Ø 33mm. Length 42mm. Hose Adaptor 19mm.
-
30
Made of clear PVC, fitted with steel spiral; very soft, no crushing, curves equal to the outer diameter; ideal for sea cocks.
-
31
Brass check valve made of brass, designed for mounting along pipework, prevents the backflow of fluids. Thread 3/4".
-
32
Fuel hose CE RINA approved - 10x19mm - Sold by meter
-
33
White plastic seacock with hose adaptor 2" with hose connector 51mm.
-
34
Brass hose adaptor 90° male version Thread 3/4" Ø 20mm.
-
35
Full flow Brass ball valve. G Thread 3/8".
-
36
Brass hose adaptor 90° male version Thread 1/2" Ø 16mm.
-
37
ISO 7840: 2013 and CE 0474 R.I.N.A approved fuel hose made of rubber suitable for adduction of diesel and petrol fuels, operating temperature from -25°C to + 120°C, Ø8/17mm, sold by the meter.
-
38
Softwall rubber hot water hose suitable for hot water and non corrosive fluids and steam mix up to 120° C. Sold by the metre. Inner D.16 mm - 5/8".
-
39
Brass doublenipple. Thread 1" x 1" 1/4.
-
40
Nylon seacocks with 90° elbow 1" 1/2. A* = 48mm, A**= 50/51mm, B= 38mm, C= 114mm, D= 72mm. Made of nylon, equipped with fastening ring.
-
41
Drain plug. Manufactured in chromed brass with nylon cap. Safety lock included. Outer size 52x35mm. Hole spacing 38mm. Hole Ø 18mm. Recess Ø 23mm.
-
42
Softwall rubber hot water hose suitable for hot water and non corrosive fluids and steam mix up to 120° C. Sold by the metre. Inner D.13 mm - 1/2".
-
43
Heavy Duty hose clamp made of AISI 316 stainless steel, designed for heavy duty usage, specially suitable for armoured pipes (exhaust pipes, WC, cooling pipes, etc). Size 48/54mm.
-
44
PREMIUM hose Ø25mm made of odor-resistant white PVC with internal steel spiral, for sanitary services, pumps and sinks, sold by the meter.
-
45
Female/Female Polypropylene Ball Valve - 1"
-
46
Melt brass female hose connectors. Thread 3/4". Hose adaptor Ø 16mm.
-
47
Brass Female-Female-Female T-fitting. Ø3/4 inches thread.
-
48
Stainless steel clamshell air for drains, vents and air intakes. Dimensions 60x70xh30mm.
