Outlet and inlet strainers

BHF (Buzzi - Hi - Flow) thru hull scoop strainer. Section 2". Section being equal, the special profile of this thru hull scoop strainer allows for a water inlet volume 2.5 times as large as a traditional one.

Oval cockpit drain. Size: 92x190mm. Hose adaptor 38mm. Made of 316 stainless steel, fitted with removable grid.

45° cockpit drain. Ø 92mm. Hose adaptor 40mm. Made of AISI316 stainless steel. Fitted with check system: an inner ball prevents any backflow. Removable grid for cleaning.

90° Skin Fittings. Thread 1" 1/2. For pipe Ø 51mm. Max hull thickness 25mm. Supplied with mirror polished ground connections.

Thru hull scoop strainer. Thread 2”. Fitted with ground connection.

Skin fittings with scupper valves. Thread 2". Length under the head 100mm. Net passage Ø 42mm. Made of mirror polished AISI 316 stainless steel, fitted with rubber non-return valve and ground connection.

Mirror polished stainless steel skin fittings with mirror polished ground connections, thread 2'', 95x84mm, Ø50mm.

90° Skin Fittings. Thread 1" 1/2. For pipe Ø 32mm. Max hull thickness 25mm. Supplied with mirror polished ground connections.

90° Skin Fittings. Thread 1" 1/2. For pipe Ø 38mm. Max hull thickness 25mm. Supplied with mirror polished ground connections.

Thru hull scoop strainer. Thread 1 1/2”. Fitted with ground connection.

Skin fittings with scupper valves. Thread 1" 1/2. Length under the head 78mm. Net passage Ø 35mm. Made of mirror polished AISI 316 stainless steel, fitted with rubber non-return valve and ground connection.

Thru hull scoop strainer. Thread 1” 1/4. Fitted with ground connection.

Stainless Steel Skin Fittings with mirror polished ground connections, thread 1” 1/2, 80x71mm, Ø38mm.

Cockpit flush drain. Version: with hose connector. A= 75mm, B= 33mm, Ø C= 70mm, Ø D= 39mm, Ø E= 1" 1/2, Ø F= 45mm. Made of two chromed brass parts. Body and insert that works as a removable filter.

Cockpit drain. D - Inside thread 1"1/2. A= 80mm, BXC 50x38mm, E= 5,5mm. Made of mirror-polished AISI316 stainless steel. Snap upper grid for mounting and hiding the fastening screws.

Yellow brass thru hull threaded seacock - Thread D.2"

90° cockpit drain with check valve. Ø head 87mm. Hose adaptor 51mm. Body made of reinforced acetyl fibre. Head of AISI316 stainless steel and check flap.

90° cockpit drain with check valve. Ø head 87mm. Hose adaptor 38mm. Body made of reinforced acetyl fibre. Head of AISI316 stainless steel and check flap.

Cockpit flush drain. Version: with hose connector. A= 78mm, B= 36mm, Ø C= 65mm, Ø D= 33mm, Ø E= 1" 1/4, Ø F= 38mm. Made of two chromed brass parts. Body and insert that works as a removable filter.

Thru hull scoop strainer. Thread 1”. Fitted with ground connection.

Cockpit flush drain. Version: All thread. A= 80mm, B= 67mm, Ø C= 70mm, Ø D= 39mm, Ø E= 1" 1/2. Made of two chromed brass parts. Body and insert that works as a removable filter.

Mirror polished stainless steel skin fittings with mirror polished ground connections, thread 1” 1/4, 77x65mm, Ø34mm.

Thru-hull, water intake with strainer made of AISI 316 stainless steel, seawater resistant. Thread 3/4".

Cockpit flush drain. Version: All thread. A= 80mm, B= 67mm, Ø C= 65mm, Ø D= 33mm, Ø E= 1" 1/4. Made of two chromed brass parts. Body and insert that works as a removable filter.

Stainless Steel thru hull skin fitting. Thread 1 inch with ground connections, thread 1”, 73x55mm, Ø25mm.

Cockpit drain. D - Inside thread 1". A= 58mm, BXC 50x38mm, E= 5,3mm. Made of mirror-polished AISI316 stainless steel. Snap upper grid for mounting and hiding the fastening screws.

Cockpit drain. Fixing hole 32mm. Hose adaptor 20mm. Deck thickness 3/11mm. Head Ø 42mm. Made of AISI316 stainless steel. The upper part is screwed thus allowing mounting on different gauges.

Cast brass thru hull scoop strainer. 1-1/2 inch thread.

Scupper vent made of precision-cast mirror polished AISI 316 stainless steel. Thread 3/4". Thread length 65. Size: 44x44x20mm.

Mirror polished stainless steel skin fittings with mirror polished ground connections, thread 3/4'', 68x49mm, Ø19mm.

Heavy yellow brass washer. Thread Ø1-1/2 inches.

Heavy brass washer drain. 1-1/2 inches thread.

Yellow plated brass through deck fitting. Thread Ø1-1/2 inches. Pipe Ø45 mm.

Chromed brass through deck fitting. Thread D.1-1/2" inches x45mm.

Scupper vent made of precision-cast mirror polished AISI 316 stainless steel. Thread 1/2". Thread length 65. Size: 38x38x18mm.

Chrome plated brass through deck fitting. Thread 1-1/4 inches. Pipe 38 mm.

Cast brass thru hull scoop strainer. 1-1/4 inch thread.

Cast brass thru hull scoop strainer. Thread 3/4".

Chrome plated brass through deck fitting. Thread 1 inch. Pipe 30mm.

Yellow plated brass through deck fitting. Thread Ø1-1/4 inches. Pipe Ø38 mm.

Sea cock yellow brass with rounded head. Thread Ø1-1/4 inches.

Heavy brass washer drain. 1-1/4 inches thread.

Cast brass thru hull scoop strainer. Thread 1".

Yellow plated brass through deck fitting. Thread Ø1 inch. Pipe Ø30 mm.

Heavy brass washer drain. 1 inches thread.

Heavy yellow brass washer. Thread Ø1 inch.

Chrome plated brass through deck fitting. Thread Ø3/4 inches. Pipe Ø24 mm.

Bilge drain plug made of mirror polished AISI 316 stainless steel. Flange 43x64mm. Hole 32mm diameter.