MORE INFORMATION
Pack of 2.25lt. White.
LIGHT PRIMER
Two-component epoxy primer thick. It forms a hard, tough and resistant to water and petroleum products. Recommended as a primer above and below the waterline for boats made of aluminium , glassfibre, plywood, steel and steel. Also suitable for prevention and repair of osmotic blistering in glass fibre reinforced polyester and for the protection of keels and rudders.
DESCRIPTION:
HEMPEL'S LIGHT PRIMER 45551 is a two-component polyamide adduct cured epoxy high build paint. It forms a hard and tough coating resistant to water and petroleum products.
RECOMMENDED USE:
Suitable on glass fibre, steel, aluminium and plywood. For interior and exterior use above and below the waterline.
PHYSICAL CONSTANTS:
Base
Colour / Reference: White / 11630
Finish: Matte
Volume solids,%: 52 ± 1
Theoretical coverage: 5.2 m² / liter at 100 microns
Flash point: 25 ° C
Specific weight: 1.3 kg / liter
Touch dry: 3-4 hours at 20 ° C
Full curing: 7 days at 20 ° C
V.O.C .: 445 g / liter
Catalyst
Colour / Reference: Grey / 12170
Finish: Matte
Volume solids,%: 51 ± 1
Theoretical coverage: 5.1 m² / liter at 100 microns
Flash point: 25 ° C
Specific weight: 1.3 kg / liter
Touch dry: 3-4 hours at 20 ° C
Full curing: 7 days at 20 ° C
V.O.C .: 450 g / liter
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, to standard deviation according to ISO 3534-1.
APPLICATION DETAILS:
Mixing ratio: Base 45559: Curing agent 95360 2: 1 by volume
Method of application: spray Air Spray HVLP gravity fed conventional suction pressure
Nozzle diameter: 1.6-1.8 mm 1.4-1.8 mm 1.4-1.8 mm 1.4-1.8 mm
Nozzle pressure: 0.7 bar 5 bar 5 bar 5 bar Airless spray Brush
Thinner (max. Vol.): 0845 (5%) 0845 (5%)
Pot life: 2 hours at 20 ° C 6 hours at 20 ° C
Nozzle orifice: .019 "-.023"
Nozzle pressure: 175 bar / 2450 psi (Airless spray data are indicative and subject to adjustment)
Cleaning of tools: HEMPEL'S THINNER 0845 - HEMPEL'S DEGREASER 99611
Suggested thickness, dry: 100 micron
Suggested thickness, wet: 200 microns
Recoat interval: (See APPLICATION INSTRUCTIONS)
Surface preparation, application conditions, and the subsequent and previous coats.