Hempel Light Primer 45551 A+B 0,75Lt Grey #456COL030

Hempel Light Primer 45551 A+B 0,75Lt Grey #456COL030

Hempel Light Primer 45551 A+B 0,75Lt Grey #456COL030

HEMPEL'S LIGHT PRIMER 45551 is a two component polyamide adduct cured epoxy high build paint. It forms a hard and tough coating resistant to water and petroleum products.
Price:
€36.78
Listing:
€49.04
You Save:
€12.26 (25%)

Description

MORE INFORMATION
Hempel Light Primer 45551 A+B. Unit size 0,75 Lt. Colour Grey.

LIGHT PRIMER
Two-component epoxy primer thick. It forms a hard and tough coating resistant to water and petroleum products. Recommended as a primer above and below the waterline for aluminum boats, fiberglass, plywood, steel and ferro-cement. Also suitable for the prevention and repair of osmotic blistering in fiberglass boats and for the protection of hulls and rudders.

DESCRIPTION:
HEMPEL'S LIGHT PRIMER 45551 is a two component polyamide adduct cured epoxy high build paint. It forms a hard and tough coating resistant to water and petroleum products.

PHYSICAL CONSTANTS:
Base
Colour / Reference: Grey
Finish: Matte
Volume solids,%: 52 ± 1
Theoretical coverage: 5.2 m² / liter at 100 microns
Flash point: 25 ° C
Specific weight: 1.3 kg/Lt
Touch dry: 3-4 hours at 20°C
Full curing: 7 days at 20°C
V.O.C .: 445 g/Lt
Catalyst
Colour / Reference: Grey / 12170
Finish: Matte
Volume solids,%: 51 ± 1
Theoretical coverage: 5.1 m² / liter at 100 microns
Flash point: 25°C
Specific weight: 1.3 kg / liter
Touch dry: 3-4 hours at 20°C
Full curing: 7 days at 20°C
V.O.C .: 450 g/Lt
The physical constants stated are obtained from the formulas approved by Hempel. They are subject to normal manufacturing tolerances and where stated, to standard deviation according to ISO 3534-1.

PRODUCT APPLICATION DETAILS:
Mixing ratio: Base 45559: Curing agent 95360 2: 1 by volume
Method of application: spray Air Spray HVLP gravity fed conventional suction pressure
Nozzle diameter: 1.6-1.8 mm 1.4-1.8 mm 1.4-1.8 mm 1.4-1.8 mm
Nozzle pressure: 0.7 bar 5 bar 5 bar 5 bar Airless spray Brush
Thinner (max. Vol.): 0845 (5%) 0845 (5%)
Pot life: 2 hours at 20 ° C 6 hours at 20 ° C
Nozzle orifice: .019 "-.023"
Nozzle pressure: 175 bar / 2450 psi (Airless spray data are indicative and subject to adjustment)
Cleaning of tools: HEMPEL'S THINNER 0845 - HEMPEL'S DEGREASER 99611
Recommended thickness, dry: 100 micron
Recommended thickness, wet: 200 microns
Recoating interval: (See APPLICATION INSTRUCTIONS)