-
1
Rule Shower sump system for wastewater includes removable strainer, clear screw down cover, integral check valve. Model 98A. 12V power supply. Dimensions 240x120 mm. 4Ah absorption.
-
2
Quick release male coupling Seawater for sea or fresh water for onboard services or washing deck. White ABS container with chrome-plated cover and non-return valve, 3/4” male thread elbow fitting.
-
3
WHALE 3-way fitting with IC automatic sensor. It can be connected to pump OS1615712 - OS1615724.
-
4
Rule 37FA automatic switch for bilge pumps. Max capacity 20A. Size: 127x54x66 (h) mm. Fitted with safety fuse.
-
5
Quick release male coupling for fresh water inflow which allows to connect the onboard system to the port water supply network, avoiding consumption of the onboard reserve.
-
6
WHALE suction strainer with IC automatic sensor. It can be connected to pump OS1615712 - OS1615724.
-
7
WHALE drain plug with IC automatic sensor. It can be connected to pump OS1615712 - OS1615724
-
8
Spare gasket kit for Whale MK5 pumps .
-
9
Automatic electronic switch for bilge pumps. Can be adapted to any bilge pump; fast installation at any point of the bilge, resistant to petrol, oil, diesel. Max 20A, power 12/24V. 82x80x19h.
-
10
WHALE automatic electronic switch for bilge pumps. ON/OFF level 32mm. Max 24V. Max 20A.
-
11
Repair kit for Whale Compact 50 pump. Diaphragm, valves and screws.
-
12
Fresh water inlet (quick release female coupling) deck coupling for sea water (or fresh water) to be used on board for washing deck or other services. Comes with white ABS container and non return valve.
-
13
Rule bilge pump switch used to automize the bilge pump work. Hardy construction. Power supply 12/24V. Electric input 14A. Dimension 127x44x66 (h) mm. Rule 35A.
-
14
Watertight trap door for Whale Pumps OS1526801/03.
-
15
Repair kit for Urchin pumps.
-
16
Deck sealing kit and screws for Whale Compact 50 pump.
-
17
Whale strainer with adjustable joint
-
18
Panel switch with audible alarm for bilge pumps. 12/24V. Size: 120x68,5mm. Model with rear cover.
-
19
Automatic electronic switch for bilge pumps. ON/OFF level 50/20mm. 12/24V. Max 20A. Size: 86x54x26h mm.
-
20
Clamping Ring Kit for Whale Compact 50 Pump. Closing ring and screws.
-
21
Seawater strainer in polycarbonate for pumps and engine cooling. L125xh115mm Pots Ø19(3/4")mm
-
22
Seawater strainer in polycarbonate for pumps and engine cooling. L125xh115mm Pots Ø16(5/8")mm
-
23
Bilge pump switch panel for 24V pumps. Current draw 15A. Size: 75x60mm.
Universal for pumps with floating or electronic switch.
-
24
Bilge pump switch panel for 12V pumps. Current draw 25A. Size: 75x60mm.
Universal for pumps with floating or electronic switch.
-
25
Switch panel to control bilge pumps. With switch for manual or automatic use of bilge pumps. Dimension 90x50 mm.
-
26
Cased eco-friendly automatic switch for any bilge pump. Max 15A. Size: 152x85x84h mm.
-
27
Marco IMP1 NBR Rubber impeller for Marco UP1, UP1-M and UP1/AC Self-priming electric pumps, Ø51,5xh22mm, bore Ø8mm, Marco 16300000.
-
28
Panel switch for electric bilge pumps. 12V. Size: 120x65mm.
Made of anodized aluminium, fitted with: Switch and pump ignition light; warning light and audible alarm that activate when there is water in the bilge; safety fuse.
-
29
Spare gasket kit for bilge pump OS1526225.
-
30
Marco IMP2 NBR Rubber impeller for UP1-J 12V and 24V Self-priming electric pumps, Ø40,5xh22mm, bore Ø8mm, Marco 16300100.
-
31
In line filter for bilge or shower pumps. Prevents blockages or damage to pumps. Clear plastic casing for easy filter check. With large mesh filter. Hose connector D.20mm.
-
32
Wall mounting bracket for 360GPH, 500GPH, 1100GPH pumps. Model 66. PUMP NOT INCLUDED. For Rule pumps produced up to the end of 2017.
-
33
Grey replacement door for pump OS1526225.