Boero Altura 619 Long Life Hard Antifouling  201 Black. 0,75 Lt .

Long life antifouling, with extreme antifouling capabilities, with multipurpose toxins, with high copper salt content. Protects hulls in wood, iron and fibreglass for many seasons.
Not suitable for aluminium hulls.

This antifouling is great for fast boats

PHYSICAL CHEMICAL DATA (at 20°C)
Finish: Semi-glossy
Colour:  Black .201
Solids (by volume): 50 ± 2 %
Specific gravity: 2,03 ÷ 2,07 g/cm³
Flash point: 36° C
Viscosity: 5.000 ÷ 8.000 cP

APPLICATION DATA
Application method: Thinner 703.000 (max. 3 - 5 %)
Dry film thickness: Standard range of application 50 μ - 70 μ (Recommended 60 μ)
Wet film thickness: Standard range of application 100 μ - 140 μ (Recommended 120 μ)
Theoretical yield at the thickness indication m2/litre: Application range at the thickness recommended 8,3
Recommended Primers: Anticorrosiva CR – Mistral Fondo – Delta 3000 – Delta UC HB

SURFACE PREPARATION
If recoating times have been exceeded, pressure wash with fresh water and remove any trace of oil or grease, allow to dry, sand thereafter and allow to dry and reapply a further coat of primer.
Apply 2 coats of ALTURA 619, on itself or antifouling of the same nature.
On old antifouling, of different or unkown nature, it will be necessary to apply a coat of Anticorrosiva CR. (not suitable for aluminium hulls).

CONDITIONS DURING APPLICATION
Ensure there is adequate ventilation when the paint is applied in confined spaces.