Energy Electricity Lighting

Aerodynamic diaphragm horn with white and chromed ABS case 12V 114dB, 100x155x70mm.

Aerodynamic diaphragm horn with black and chromed ABS case 12V 114dB, 100x155x70mm.

The new SBC NRG+ battery chargers are more compact with connectors which make their connection easy and practical. Thanks to their efficiency, they are capable of offering a much lower consumption, a lower heat emission.

The new SBC NRG+ battery chargers are more compact with connectors which make their connection easy and practical. Thanks to their efficiency, they offer a much lower consumption, a lower heat emission and a greater system reliability.

The new SBC NRG+ battery chargers are more compact with connectors which make their connection easy and practical. Thanks to their efficiency, they offer a much lower consumption, a lower heat emission and a greater system reliability.

The new SBC NRG+ battery chargers are more compact with connectors which make their connection easy and practical. Thanks to their efficiency, they are offer a much lower consumption, a lower heat emission and a greater system reliability.

Three stage IUoU battery charging. Multiple outputs in order to charge more groups of batteries. Differentiated charging for open or sealed liquid electrolite, GEL or AGM batteries. Equipped with RDS1562 remote panel, instrument for SBC NRG+ LCD.

Three stage IUoU battery charging. Multiple outputs in order to charge more groups of batteries. Differentiated charging for open or sealed liquid electrolite, GEL or AGM batteries. Equipped with RDS1562 remote panel, instrument for SBC NRG+ LCD.

Three stage IUoU battery charging. Multiple outputs in order to charge more groups of batteries. Differentiated charging for open or sealed liquid electrolite, GEL or AGM batteries. Equipped with RDS1562 remote panel, instrument for SBC NRG+ LCD.

Three stage IUoU battery charging. Multiple outputs in order to charge more groups of batteries. Differentiated charging for open or sealed liquid electrolite, GEL or AGM batteries. Equipped with RDS1562 remote panel, instrument for SBC NRG+ LCD.

Three stage IUoU battery charging. Multiple outputs in order to charge more groups of batteries. Differentiated charging for open or sealed liquid electrolite, GEL or AGM batteries. RDS1562 remote panel not included.

Three stage IUoU battery charging. Multiple outputs in order to charge more groups of batteries. Differentiated charging for open or sealed liquid electrolite, GEL or AGM batteries. RDS1562 remote panel not included.

Three stage IUoU battery charging. Multiple outputs in order to charge more groups of batteries. Differentiated charging for open or sealed liquid electrolite, GEL or AGM batteries. RDS1562 remote panel not included.

Three stage IUoU battery charging. Multiple outputs in order to charge more groups of batteries. Differentiated charging for open or sealed liquid electrolite, GEL or AGM batteries. RDS1562 remote panel not included.

Three stage IUoU battery charging. Multiple outputs in order to charge more groups of batteries. Differentiated charging for open or sealed liquid electrolite, GEL or AGM batteries. Equipped with RDS1562 remote panel, instrument for SBC NRG+ LCD.

Three stage IUoU battery charging. Multiple outputs in order to charge more groups of batteries. Differentiated charging for open or sealed liquid electrolite, GEL or AGM batteries. RDS1562 remote panel not included.

Quick RDS 1562 remote panel is an instrument which allows to monitor the status and to set some parameters of the SBC NRG+ series QUICK battery chargers by means of the CAN BUS communication interface.

Battery container max 120A with straps and fixing jumpers, white/yellow, 384x177x205mm.

Cabling coil. Electric cable protective belts, entry and exit at any point. wiring Ø 2-15mm. Roll 5m.

Cabling coil. Electric cable protective belts, entry and exit at any point. Wiring Ø 7-40mm. Roll 5m.

Electric cable protective belts, entry and exit at any point. Wiring Ø 13-70mm. Roll 5m.

Terminal board 6 terminals. Fitted with nickel plated brass terminal clamps. Separators to avoid accidental contacts.

Bus-bar electric terminal board. Shunt terminal 10x4mm. Power terminals 2x6mm. Base 145x31mm. 150A continuous capacity.

Stainless steel swiveling mount for navigation lights - Tube D.22/25mm

Rib insulator with Nickel-plated Brass terminals. Each screw pair form one isolated circuit. 6 terminals. Capacity 20A.

Rib insulator with Nickel-plated Brass terminals. Each screw pair form one isolated circuit. 8 terminals. Capacity 20A.

Reinforced plastic waterproof electric connection box with rubber wire and cover seals. Terminal blocks for wires up to 4 mm2. 4+4 Terminals. Size: 130x76xH45mm.

Reinforced plastic waterproof electric connection box with rubber wire and cover seals. Terminal blocks for wires up to 4 mm2. 8+8 Terminals. Size: 140x100xH54mm.

Battery box for Nautiline batteries made of unbreakable plastic with fastening strap. Dimensions: internal size: 270x190xh200 mm. External size: 345x220xh255 mm. Colour: black.

Battery box made of unbreakable plastic. With fastening strap. Dimension 385x175xH225mm, internal size. Dimension 470x225xH255mm, external size. Colour: Black.

Black battery box made of durable plastic material. Equipped with a removable cover, a retaining strap and handles for easy handling. Dimensions: 339x199xh224mm internal, 431x257xh256mm external.

Terminal block for electrical installations. 8 terminals. Base: 83 x150mm.

White nylon cable ties 2,5x100 mm. 100 piece pack.

White nylon cable ties 2,5x160 mm. 100 piece pack.

20A Glass fuses for instruments, sizes 6.3x32 mm. Pack of 10 pieces.

7.5A Glass fuses for instruments, sizes 6.3x32 mm. Pack of 10 pieces.

3A Glass fuses for instruments, sizes 6.3x32 mm. Pack of 10 pieces.

1A Glass fuses for instruments, sizes 6.3x32 mm. Pack of 10 pieces.

Double threaded studs M10X200 Art.9215 self-tapping in A2 stainless steel, preassembled, adjustable in height, for solar photovoltaic fixing on roofs of buildings, set of 4 pieces.

Self adhesive: Flexible module is already supplied with double-sided tape applied on the sides.

Eyelets: Flexible module comes with eyelets on the sides, for easy installation of the same.

Tenax for Canvas: Flexible module is supplied with clips that allow you to place and remove the Panel.

Hinge: The hinge that is stitched to the flexible module, useful in different types of integration.

The best way to make an electrical connection through a surface. It allows a secure, elegant and removable installation.

Stainless steel spare blade 280mm for windscreen wipers with telescopic arm from 200/280mm.

Stainless steel spare blade 350mm for windscreen wipers with telescopic arm from 270x350mm, code 13801346.

In-line flying fuse box for glass fuses size 6x32 mm.

Watertight rubber cover for tumbler switch N51324700940-N51324700941-N51324700942-N51324700943.