-
1
Adjustable motor bracket manifactured in anodized aluminium. 5-position adjustment. 25HP
-
2
Central roller made of resistant rubber is ideal for moving a boat on a trailer. It also allows you to keep the boat in the center of a trailer. 76x80mm, Ø14mm hole.
-
3
Rubber central roller. Black colour. D.77 mm - L.100 mm - Hole 16 mm.
-
4
Rubber central roller. Black colour. Ø Hole 14mm. Length 130mm.
-
5
Interlocking steering cable bellow, to be fixed in 69 mm diameter hole. D.103 mm. Height 109 mm. White colour.
-
6
Interlocking steering cable bellow, to be fixed in 69 mm diameter hole. D.103 mm. Height 109 mm. Grey colour.
-
7
Interlocking steering cable bellow, to be fixed in 69 mm diameter hole. D.103 mm. Height 109 mm. Black colour.
-
8
Exhaust muffler for water cooled engines. Maximum power 115 HP. Collars D.55/60/65 mm. Capacity 20 lt. Length A: 322 mm. Total length B: 660 mm. Height C: 320 mm. Width D: 220 mm.
-
9
CAN-SB Lima plastic fuel tank 57lt. Dimensions: A 600mm x B 500mm x C 150mm x D 230mm. CE ISO 21487 certified.
-
10
White fixing kit for tanks, rafts, diving tanks etc with 4 brackets and 2 belts.
-
11
Spare Cap with vent for plastic portable fuel tanks.
-
12
Red spare Cap with vent for fuel tanks CAN-SB.
-
13
Water deck filler cap. White plastic. Dimensions: H 78mm x D 88mm x dia 32mm x d 38mm.
-
14
Chrome plated plastic water deck filler cap. Dimensions: H 78mm x D 88mm x di 32mm x d 38mm.
-
15
Water deck filler cap with vent - White - D.38mm
-
16
Chrome plated water deck filler cap. Dimensions: H 78mm x D 110mm x di 32mm x d 38mm x d1 50mm x e 17mm x f 19mm.
-
17
Security stop key with spiral string for OMC and Johnson Envirude outboard engines with manual starting.
-
18
Cut-off switch fitted with safety key and float. Fitted with slip-off clip system, universal size, it can open and close the circuit depending on the terminals that are connected.
-
19
Spare key for cutoff code OS1420496.
-
20
Brass ignition key. 5 positions. Rear contacts 5. 15A.
-
21
Watertight ignition key 3 positions black nylon. Rubber cap. 10A. 3 Rear contacts. Positions 3, see layout A.
-
22
MAXPROP Propeller Zinc anode. Clutch diameter 130x80 mm. 2.286kg.
-
23
SHAFRAN Bolt-on Plate 148x110xh20mm ID12 Zinc anode, 5.011lb.
-
24
CATERPILLAR Heat Exchanger Sleeve Threaded Zinc Anode for Cooling System. Original Reference: 6L2286. Dimensions: ∅ 28x55+20 mm; Thread 3/4".
-
25
CATERPILLAR Heat Exchanger Sleeve Threaded Zinc Anode for Cooling System. Dimensions: ∅ 30x64+20 mm; Thread 3/4".
-
26
Zinc anode to be weld for hull - 150x80mm - 3 kg
-
27
Oval anode with insert made of galvanized iron to be welded. Length 200mm, Width 100mm, Height 20mm. Weight 3kg.
-
28
Dice for shafts - M30
-
29
-
30
-
31
-
32
VOLVO for Bow Truster Propellers Ogive Zinc Anode. Dimensions: ∅ 26x20 interno 7 mm. VOLVO for Side-Power (Sleipner) SP-SE 30/40 Propellers Ogive Zinc Anode. Original Reference: 61180.
-
33
Washer for propeller anode - Shaft D.45mm
-
34
-
35
Complete Zinc Anode for Propeller Shaft. Dimensions: Axis ∅ 40 mm; Standard Thread: 26x2 mm. With Interchangeable Zinc Anode our Code 05430211.
-
36
-
37
MAXPROP Zinc Anode. Diameter 36mm. F-MAX-9.
-
38
Gori 155-00000 Ring Shaft Zinc Anode, external diameter 127mm, height 50mm, internal diameter 90mm, weight 1,907kg.
-
39
Low Olive Zinc Anode for Propeller Shaft Fitted with Stainless Steel Pins and Nuts. Dimensions: Hole ∅ 19 mm; Thread 3/4"; Thickness 14 mm.
-
40
Low Olive Zinc Anode for Propeller Shaft ∅ 35 mm Fitted with Stainless Steel Pins and Nuts. Dimensions: Hole ∅ 35 mm; Thread 1"3/8; Thickness 20 mm.
-
41
-
42
Low Olive Zinc Anode for Propeller Shaft Fitted with Stainless Steel Pins and Nuts. Dimensions: Hole ∅ 45 mm; Thickness 30 mm.
-
43
Low Olive Zinc Anode for Propeller Shaft Fitted with Stainless Steel Pins and Nuts. Dimensions: Hole ∅ 50 mm; Thickness 30 mm.
-
44
-
45
-
46
-
47
-
48
Radice Axis Line Ogive Zinc Anode. Dimensions: ∅ 73 mm; ∅(1) 57 mm; ∅(2) 11 mm; ∅(3) 27 mm; H 84 mm. Spare Zinc Anode for our Code 05430156.
