-
1
Exhaust muffler for water-cooled engines. Max power 300HP. Mouths 100/115mm. Capacity 33L. Length A= 370mm, Length B= 760mm, height C= 400mm, width D= 290mm.
-
2
Water/gas separator 2,5 litres. Gas inlet/outlet fittings 40/45/50mm. Water inlet/outlet fittings 38/15mm. A= 200mm, B= 110mm.
-
3
Water/gas separator 4,5 litres. Gas inlet/outlet fittings 40/45/50mm. Water inlet/outlet fittings 38/15mm. A= 260mm, B= 160mm.
-
4
Antisiphon device to be used on exhaust lines, seawater connectors and WCs installed under the floating line. Hose adaptor Ø 13/19/25/32 (1/2"-3/4"-1"-1"1/4)mm. Size: 92x150mm.
-
5
Fuel primer bulb. Ø 47,5mm. Length 145mm. For fuel hoses Ø 6/8/10mm. Made of special technopolymer. Fitted with removable 6/8/10-mm Ø fittings.
-
6
Stainless steel spring for fuel hose fitting to connector or primer. 4 pieces.
-
7
VET 1 Plate hull anode for fairings. Size: 150x60xh25 mm. Center distance 80 mm.
-
8
Universal ground plate for fuel tanks Ø 55mm. Made of porous bronze, designed for fuel tanks, essential for unloading static electricity that may spark off into the fuel causing an explosion during re-fuelling.
-
9
Fuel connector Ø 8mm 5/16". Length 51mm. Double brass connector to connect the tank to the outboard engine. Universal.
-
10
Fuel connector Ø 10mm 3/8". Length 51mm. Double brass connector to connect the tank to the outboard engine. Universal.
-
11
Starting key with pressure starter, with no accessory position, same as General 3976, Johson/Evinrude 333931/390133/390129/388175. 6 terminals. Position 3 (OFF - IGN - START).
-
12
Propeller puller for shaft lines 25mm to 38mm (1" - 1"1/2). Suitable for 2 to 5 blade propellers. Made of high-resistance steel.
-
13
Propeller puller for shaft lines 40mm to 52mm (1" 5/8- 2"). Suitable for 2 to 5 blade propellers. Made of high-resistance steel.
-
14
Special universal keys. Designed to screw/unscrew propeller's studs, length of 330 mm; made of nylon/fiberglass.
-
15
Shaft line bushings made of rubber. External/internal version in millimetres. Ø A 22mm. Ø B 29mm. C 75mm.
-
16
Shaft line bushings made of rubber. External/internal version in millimetres. Ø A 22mm. Ø B 36mm. C 80mm.
-
17
Shaft line bushings made of rubber. External/internal version in millimetres. Ø A 25mm. Ø B 36mm. C 100mm.
-
18
Shaft line bushings made of rubber. External/internal version in millimetres. Ø A 25mm. Ø B 40mm. C 120mm.
-
19
Shaft line bushings made of rubber. External/internal version in millimetres. Ø A 30mm. Ø B 40mm. C 120mm.
-
20
Shaft line bushings made of rubber. External/internal version in millimetres. Ø A 35mm. Ø B 54mm. C 140mm.
-
21
Shaft line bushings made of rubber. External/internal version in millimetres. Ø A 40mm. Ø B 54mm. C 140mm.
-
22
Stainless steel line clamp cutter. Axis Ø 25mm. Outer Ø 80mm. Thickness 22mm. The clamp system enables to install the cutter without disassembling the propeller.
-
23
Stainless steel line clamp cutter. Axis Ø 30mm. Outer Ø 80mm. Thickness 22mm. The clamp system enables to install the cutter without disassembling the propeller.
-
24
Stainless steel line clamp cutter. Axis Ø 31,75mm (1" 1/4). Outer Ø 80mm. Thickness 22mm. The clamp system enables to install the cutter without disassembling the propeller.
-
25
Stainless steel line clamp cutter. Axis Ø 35mm. Outer Ø 100mm. Thickness 22mm. The clamp system enables to install the cutter without disassembling the propeller.
-
26
Stainless steel line clamp cutter. Axis Ø 40mm. Outer Ø 100mm. Thickness 22mm. The clamp system enables to install the cutter without disassembling the propeller.
-
27
Stainless steel line clamp cutter. Axis Ø 44,5mm (1" 3/4) (A). Outer Ø 120mm. Thickness 22mm. The clamp system enables to install the cutter without disassembling the propeller.
-
28
Stainless steel line clamp cutter. Axis Ø 45 (A). Outer Ø 120mm. Thickness 22mm. The clamp system enables to install the cutter without disassembling the propeller.
-
29
Stainless steel line clamp cutter. Axis Ø 50 (A). Outer Ø 120mm. Thickness 22mm. The clamp system enables to install the cutter without disassembling the propeller.
-
30
Rubber stuffing box. Centerline Ø 25mm. Stuffing box case Ø 43mm. Long lasting insulation from water seepage, low maintenance required if correctly treated. Made of a special type of rubber resistant to salt water and lubricating grease.
-
31
Rubber stuffing box. Centerline Ø 30mm. Stuffing box case Ø 49mm. Long lasting insulation from water seepage, low maintenance required if correctly treated. Made of a special type of rubber resistant to salt water and lubricating grease.
-
32
Rubber stuffing box. Centerline Ø 35mm. Stuffing box case Ø 55mm. Long lasting insulation from water seepage, low maintenance required if correctly treated. Made of a special type of rubber resistant to salt water and lubricating grease.
-
33
Rubber stuffing box. Centerline Ø 40mm. Stuffing box case Ø 60mm. Long lasting insulation from water seepage, low maintenance required if correctly treated. Made of a special type of rubber resistant to salt water and lubricating grease.
-
34
Rubber stuffing box. Centerline Ø 45mm. Stuffing box case Ø 65mm. Long lasting insulation from water seepage, low maintenance required if correctly treated. Made of a special type of rubber resistant to salt water and lubricating grease.
-
35
Rubber stuffing box. Centerline Ø 50mm. Stuffing box case Ø 70mm. Long lasting insulation from water seepage, low maintenance required if correctly treated. Made of a special type of rubber resistant to salt water and lubricating grease.
-
36
Rubber stuffing box. Centerline Ø 25mm. Stuffing box case Ø 43mm. Long lasting insulation from water seepage, low maintenance required if correctly treated. Made of a special type of rubber resistant to salt water and lubricating grease.
-
37
Rubber stuffing box. Centerline Ø 30mm. Stuffing box case Ø 49mm. Long lasting insulation from water seepage, low maintenance required if correctly treated. Made of a special type of rubber resistant to salt water and lubricating grease.
-
38
Rubber stuffing box. Centerline Ø 35mm. Stuffing box case Ø 55mm. Long lasting insulation from water seepage, low maintenance required if correctly treated. Made of a special type of rubber resistant to salt water and lubricating grease.
-
39
Rubber stuffing box. Centerline Ø 40mm. Stuffing box case Ø 60mm. Long lasting insulation from water seepage, low maintenance required if correctly treated. Made of a special type of rubber resistant to salt water and lubricating grease.
-
40
Rubber stuffing box. Centerline Ø 45mm. Stuffing box case Ø 65mm. Long lasting insulation from water seepage, low maintenance required if correctly treated. Made of a special type of rubber resistant to salt water and lubricating grease.
-
41
Rubber stuffing box. Centerline Ø 50mm. Stuffing box case Ø 70mm. Long lasting insulation from water seepage, low maintenance required if correctly treated. Made of a special type of rubber resistant to salt water and lubricating grease.
-
42
Plug fitted with mechanical level indicator and hand for Eltex fuel tanks with 22, 34 and 29 liter capacity.
-
43
Chromed brass deck plug FUEL with special rotating lever opening system avoids the need for keys, coins, screwdrivers or any other device. Certified by RINA. Ø50mm.
-
44
Heat Exchanger Sleeve Threaded Zinc Anode for Cooling System. Original Reference: MEZ1. Dimensions: Ø12.7x38mm; Thread 3/8".
-
45
Neutral chromed brass deck plug with the special rotating lever opening system avoids the need for keys, coins, screwdrivers or any other device. Certified by RINA. Ø38mm. Without writing.
-
46
Universal steel band key for remove filters. Compatible with all oil, diesel and petrol filters for the maintenance of your car, motorcycle, camper van, boat etc. Max 105mm socket.
-
47
Chromed brass deck plug Water with special rotating lever opening system avoids the need for keys, coins, screwdrivers or any other device. Certified by RINA. Ø50mm.
-
48
Special Filtering Funnel. Diameter 216mm. Height 254mm. Passage 19 l/m. This special 0,005-inch Teflon filter separates water from petrol or gasoil to prevent troubles.
