-
1
Classic Guerini chromed brass handle 133mm. Fitted with washers:yes. Frame 8mm.
-
2
SLIM chromed brass handle 124mm. Fitted with washers: Yes. Frame 8mm.
-
3
Oval M chromed brass handle. Size: 26x51mm. Frame 8mm. Fitted with washers: no.
-
4
Latch with pressure opening. Flush latch made of chromed brass with pressure opening. Very elegant and practical.
-
5
Stainless steel Built-in hinge for hatches. AxB 75x35mm. C 10mm. DxE 34x28mm. F 110mm.
-
6
PIRAMID Hinge for hatches. Made of mirror polished AISI 316 stainless steel. A x B 45x30mm. C 8,2mm. D x E 14x23mm. F x B 60x30mm.
-
7
PIRAMID Hinge for hatches. Made of mirror polished AISI 316 stainless steel. A x B 70x30mm. C 10mm. D x E 30x23mm. F x B 100x30mm.
-
8
Hinge for 90° Piramid doors. Mirror-polished AISI 316 stainless steel. Wall mounting. AxB 43x30mm. C 8mm. DxE 25x30mm. FxB 68x30mm.
-
9
Hinge with bores made of mirror polished stainless steel. Width 30mm. Thickness 1mm. Bore Ø 3,3mm. Bore pitch 60. On center 16. Type with bores and countersunk. 2m bar.
-
10
Hinge with bores made of mirror polished stainless steel. Width 40mm. Thickness 1,5mm. Bore Ø 4,3mm. Bore pitch 90. On center 23. Type with bores and countersunk. 2m bar.
-
11
Hinge with bores made of mirror polished stainless steel. Width 30mm. Thickness 1,5mm. Bore Ø 3,5mm. Bore pitch 50. On center 19. Type with bores and countersunk. 2m bar.
-
12
Hinge with bores made of mirror polished stainless steel. Width 30mm. Thickness 0,8mm. Bore Ø 3,3mm. Bore pitch 60. On center 16. Type with bores. 2m bar.
-
13
Hinge with bores made of mirror polished stainless steel. Width 40mm. Thickness 1,5mm. Bore Ø 4,3mm. Bore pitch 90. On center 23. Type with bores. 2m bar.
-
14
Hinge with bores made of mirror polished stainless steel. Width 50mm. Thickness 1,5mm. Bore Ø 4,3mm. Bore pitch 90. On center 28. Type with bores. 2m bar.
-
15
U-bolt conic fitting. D= 9.5mm, L1= 110mm, L2= 63.5mm, L3= 35mm, B= 26.1mm, C= 35.7mm. Breaking load 7826kg. Made of mirror-polished stainless steel.
-
16
Male forged eyebolt Thread C 6mm. B= 16mm, h= 28mm, L= 41mm, L1= 13mm, D2= 17mm. Made of AISI 316 stainless steel, light weight.
-
17
AISI316 stainless steel male screw eyebolt with turned pin and eye, Ø8x100mm thread, Ø14mm eye.
-
18
Round plate hook polished made of polished stainless steel. Hook diameter 5mm. Distance between grappling hook and base 8.5 mm. Base diameter Ø33mm. 4.5mm hole.
-
19
Round plate hook polished made of polished stainless steel. Hook diameter 6mm. Distance between grappling hook and base 12.5 mm. Base diameter Ø40mm. 4.5mm hole.
-
20
Round plate hook polished made of polished stainless steel. Hook diameter 8mm. Distance between grappling hook and base 14.5 mm. Base diameter Ø50mm. 5.5mm hole.
-
21
Round stainless steel ring, inner diameter: 10x60 mm.
-
22
FLUSH DECK power point. A= 70mm, B= 60mm, C= 21mm. Breaking load 1100kg. High-resistance power point suitable to fasten rafts, inflatables, etc. on deck or platforms. or to fasten lifelines or other on sail boats.
-
23
Folding pad eyes with HR forged eye. Type: Single, small, 2 bores. A= 46mm, C= 45mm, D= 23mm. Ring section Ø 6mm. Ø screws 6mm. Breaking load 1800kg.
-
24
Folding pad eyes with HR forged eye. Type: Single, small. A= 47mm, B= 27mm, C= 45mm, D= 25mm. Ring section Ø 6mm. Ø screws 6mm. Breaking load 2200kg.
-
25
Folding pad eyes with HR forged eye. Type: Single, medium. A= 61mm, B= 35mm, C= 59mm, D= 30mm. Ring section Ø 8mm. Ø screws 6mm. Breaking load 4000kg.
-
26
Folding pad eyes with HR forged eye. Type: Single, large. A= 77mm, B= 46mm, C= 75mm, D= 40mm. Ring section Ø 10mm. Ø screws 6mm. Breaking load 7000kg.
-
27
Folding pad eyes with HR forged eye. Type: Double, small. A= 87mm, B= 27mm, C= 45mm, D= 360mm. Ring section Ø 6mm. Ø screws 6mm. Breaking load 3600kg.
-
28
Folding pad eyes with HR forged eye. Type: Double, medium. A= 99mm, B= 35mm, C= 59mm, D= 60mm. Ring section Ø 8mm. Ø screws 6mm. Breaking load 6800kg.
-
29
Folding pad eyes with HR forged eye. Type: Double, large. A= 126mm, B= 245mm, C= 75mm, D= 79mm. Ring section Ø 10mm. Ø screws 6mm. Breaking load 12000kg.
-
30
Stainless steel stud kit for cleats. Size: 6x60mm. Supplied with nuts and washers (2 studs, 2 nuts, 2 washers).
-
31
Stainless steel stud kit for cleats. Size: 8x60mm. Supplied with nuts and washers (2 studs, 2 nuts, 2 washers).
-
32
Stainless steel stud kit for cleats. Size: 8x80mm. Supplied with nuts and washers (2 studs, 2 nuts, 2 washers).
-
33
Stainless steel stud kit for cleats. Size: 10x60mm. Supplied with nuts and washers (2 studs, 2 nuts, 2 washers).
-
34
Stainless steel stud kit for cleats. Size: 10x80mm. Supplied with nuts and washers (2 studs, 2 nuts, 2 washers).
-
35
Stainless steel stud kit for cleats. Size: 12X100mm. Supplied with nuts and washers (2 studs, 2 nuts, 2 washers).
-
36
Stainless steel stud kit for cleats. Size: 14x100mm. Supplied with nuts and washers (2 studs, 2 nuts, 2 washers).
-
37
Stainless steel stud kit for cleats. Size: 16x120mm. Supplied with nuts and washers (2 studs, 2 nuts, 2 washers).
-
38
Stainless steel stud kit for cleats. Size: 20x120mm. Supplied with nuts and washers (2 studs, 2 nuts, 2 washers).
-
39
Anodized light alloy tube. Diameter 22mm. Bar length 3 meters. Thickness 2.1 mm.
-
40
Streamlined handle made of mirror-polished AISI316 stainless steel. Length 185mm. Height 29mm. Optional studs OS4014206 (Ø 6 mm).
-
41
Handle made of precision-cast mirror-polished AISI316 stainless steel with plastic base. Length 170mm. Height 40mm. Mounting 2 x 8 Ø mm studs.
-
42
Handle fitted with plastic base. Made of precision-cast mirror-polished AISI316 stainless steel. Length 170mm. Height 40mm. Mounting 2 screws.
-
43
Handle fitted with plastic base. Made of precision-cast mirror-polished AISI316 stainless steel. Length 300mm. Height 50mm. Mounting 2 x 8 Ø mm studs.
-
44
Handle fitted with plastic base. Made of precision-cast mirror-polished AISI316 stainless steel. Length 300mm. Height 50mm. Mounting 2 screws.
-
45
White Round polyethylene underplate. External Ø 50.5mm. Inside Ø 46.5mm. For bases OS4141230. Pack of 10 pieces.
-
46
Oval pipe polished and anodized. Size: 40x20mm. Sold in bars of 2 metres. For fitting into handrail model OS4160800; OS4160900.
-
47
Pairs of Stainless steel side handrail with inclined uprights. Length 100cm. Height 11cm. With stainless steel bases and 22-mm Ø polished pipe.
-
48
Handrail Section 20x40mm. Length 762mm. Height 59mm. Made of mirror-polished AISI316 stainless steel, elliptical section.
