International Perfection Polyurethane Two Component Enamel A+B 2,25Lt #458COL659

International Perfection Polyurethane Two Component Enamel A+B 2,25Lt #458COL659
  • International Perfection Polyurethane Two Component Enamel A+B 2,25Lt #458COL659
  • International Perfection Polyurethane Two Component Enamel A+B 2,25Lt #458COL659

International Perfection Polyurethane Two Component Enamel A+B 2,25Lt #458COL659

Two-component polyurethane enamel. Perfection® is a two-component polyurethane enamel giving maximum performance that produces a high gloss finish and exceptional durability.
Price:
€152.27
Listing:
€203.02
You Save:
€50.75 (25%)

Description

PRODUCT DESCRIPTION

Perfection® 2-part polyurethane is the ultimate performing, high gloss topside finish. It provides the longest-lasting, ultra-high gloss finish that has superb colour retention, together with excellent chemical and abrasion resistance. It has been formulated specifically to enable skilled amateur users to achieve professionalquality results with ease. UV filters combined with the chemical cure of the polyurethane give the longest life possible.

* Hardest, abrasion-resistant finish making it an excellent choice for use on high wear areas e.g. decks (with Intergrip additive).
* Chemically resistant to diesel, petrol, oil, mild acids and alkalis

PRODUCT INFORMATION
Colour: YHA183-Platinum, YHA184-Med. White, YHA192-Off White, YHA194-Oyster White, YHA198-Mat'horn White, YHA216-Royal Blue, YHB000-Snow White, YHB663-Jade Mist Green, YHE294-Chilli Red, YHF991-Mauritius Blue, YHK990-Flag Blue, YHS056-Fight. Lady Yellow, YHS070-Cream, YHS187-Polar White, YHS248-Arctic White, YHS253-Pearl White, YHS299-Rochelle Red, YHS936-Lauderdale Blue, YHY999-Jet Black Finish High Gloss
Specific Gravity 1.17
Volume Solids 49%
Mixing Ratio 2:1 by volume (as supplied)
Converter/Curing Agent YGB001
Typical Shelf Life: 2 yrs
VOC (As Supplied) 486 g/lt
Unit Size: 750 ml, 2.5 lt
Note: Not all colours or unit sizes are available in all countries. Consult with your local Technical Representative for further information.

DRYING/OVERCOATING INFORMATION
Drying
5°C (41°F)  15°C (59°F)  23°C (73°F)  35°C (95°F) 
Touch Dry 11 hrs 7 hrs 4 hrs 3 hrs
Pot Life: 5 hrs 3 hrs 2 hrs 1 hrs Overcoating

Substrate Temperature
5°C (41°F)  15°C (59°F)  23°C (73°F)  35°C (95°F) 
Overcoated By Min Max Min Max Min Max Min Max
Perfection 28 hrs 4 days 14 hrs 3 days 6 hrs 2 days 4 hrs 1 days

APPLICATION AND USE
Preparation: PREVIOUSLY PAINTED SURFACES
In Good Condition: Wash with Super Cleaner, rinse with fresh water and allow to dry. Abrade with 280-320 grade (grit) paper.
In Poor Condition: Remove all previous coatings and prime the substrate.

PRIMING: Preparation DETAILS For bare substrates are set out in the relevant primer datasheet.
BARE/NATURAL WOOD: Prime with Interprotect.
STEEL: Prime with Interprotect.
ALUMINIUM: Prime with Interprotect.
GRP: Wash with Super Cleaner, rinse with fresh water and allow to dry. Sweep blast or abrade with 180-220 grade paper. No priming necessary.

AGED/WEATHERED GELCOATS: Due to the potentially porous nature of aged/weathered gelcoats the risk of solvent/moisture entrapment after painting is much higher than when gelcoat is new. As a result this entrapment could lead to blistering of the paint film. To reduce the risk of paint film blistering it is recommended that 3 coats of Interprotect are applied to seal the gelcoat. Interprotect must be overcoated with Perfection Undercoat prior to topcoat application.

ALL SUBSTRATES: Use Perfection Undercoat.

Method: Sand the undercoat smooth with 320-400 grit wet or dry paper. Remove dust with a tack rag. Apply 2-3 coats.

Useful Tips: Mixing: Stir contents of each part prior to mixing. Add Curing Agent to the Base, stir and leave for 20 minutes to allow bubbles to disperse.Thinner International Retarder Thinner #9.
Thinning: May be thinned between 5-10% to assist application.
Cleaner: International Retarder Thinner #9.
Ventilation and Humidity Control: Apply in dry, well ventilated conditions. Avoid excessively humid conditions, over 80% relative humidity.

Other: Best applied at 15°C. For lighter colours, mix the first coat of finish 50:50 with the undercoat to improve the depth of color and opacity. Both products should be mixed with respective curing agents first. For best results when applying by roller, smooth off with a pad or brush. If using as a deck paint, mix in non-slip additive. Full hardness is achieved after 7-10 days at 15°C/59°F. If required, Perfection Matting Additive (YZM914) is available for use with Perfection. See Perfection Matting Additive datasheet for details on use.

Some Important Points: Do not use unless mixed thoroughly with the curing agent at specified ratio. Avoid painting in direct sunlight. Avoid applying late in the evening as condensation can cause a loss of gloss during overnight cure. Allow to dry in a well ventilated environment. Product temperature should be minimum 15°C/59°F and maximum 35°C/95°F. Ambient temperature should be minimum 5°C/41°F and maximum 30°C/86°F. Substrate temperature should be minimum 5°C/41°F and maximum 30°C/86°F. 

Compatibility/Substrates: Do not use Perfection on flexible constructions. Will crack on carvel and clinker/lapstrake hulls. Perfection should not be used over any one-component products. Not suitable for permanently immersed surfaces.
Number of Coats: 2-3
Coverage/spreading rate (Theoretical) - 13.24 m²/lt
(Practical) - 11.9 m²/lt
Recommended dry film thickness (DFT) per coat: 37 microns
Recommended wet film thickness (WFT) per coat: 76 microns
Application Methods: Brush, Roller, DO NOT SPRAY - Professionals looking for details on spray application should refer to the Perfection (Professional) datasheet.

Available colours:
458COL659      Bianco S253 YHS253
458COL6591    Bianco A184 YHA184
458COL6593    Bianco A194 YHA194   
458COL6594    Bianco A198 YHA198   
458COL6596    Bianco B000 YHB000   
458COL6599    Blu Scuro F991 YHF991
458COL6601    Bianco S187 YHS187   
458COL6602    Bianco S248 YHS248



Unit size 2.25lt.

NOTE: Choose desiderd colour from the drop down menu.

Available colours:
458COL659      Bianco S253 YHS253
458COL6591    Bianco A184 YHA184
458COL6593    Bianco A194 YHA194   
458COL6594    Bianco A198 YHA198   
458COL6596    Bianco B000 YHB000   
458COL6599    Blu Scuro F991 YHF991
458COL6601    Bianco S187 YHS187   
458COL6602    Bianco S248 YHS248