-
x
Description
PRODUCT DESCRIPTION
This product is a blend of organic solvents specifically designed for thinning and/or equipment cleaning in association with Interspray 900, Interprime 880, Interprime 820 and Polyurethane Basecoat (not available in North America) for applications by spray. Use for spray applications in the approximate temperature range: 15-22°C. Thinner 920 can be blended to facilitate spraying over a range of temperatures for optimum results. For further details consult the Interspray Application Manual.
PRODUCT INFORMATION
Specific Gravity 0.820
Volume Solids 0%
Typical Shelf Life 2 yrs
VOC (As Supplied) 820 g/lt
Unit Size 1 Lt
DRYING/OVERCOATING INFORMATION
Drying
Overcoating
Substrate Temperature
5°C (41°F) 10°C (50°F) 23°C (73°F) 35°C (95°F)
Overcoated By Min Max Min Max Min Max Min Max
APPLICATION AND USE
Method: When using for surface wipe down, turn the cloth frequently to avoid re-applying residues. Thin Interspray 900 by 25-35% with Thinner 920 for application of an initial finish coat at 15-22°C. For application of subsequent coats of Interspray 900, thin 35%.
Tipe: Ventilation and Humidity Control Ensure adequate ventilation during use.
NOTE: This thinner should not be confused with "Standard Thinner 920" (YTA921), which is a different blend of solvents.
YTA921 is NOT suitable for use with the new Interspray 900. The new version of Interspray 900 can be identified by the "YZ" sales code.
Compatibility/Substrates: Suitable for spray application of International's professional polyurethane topcoat, Interspray 900.
TRANSPORTATION, STORAGE AND SAFETY INFORMATION
Storage GENERAL INFORMATION:
Exposure to air and extremes of temperature should be avoided. For the full shelf life of this product to be realised ensure that between uses the container is firmly closed and the temperature is between 5°C/41°F and 35°C/95°F. Keep out of direct sunlight.
TRANSPORTATION:
The product should be kept in securely closed containers during transport and storage.
Safety: GENERAL: Read the label safety section for Health and Safety Information, also available from our Technical Help Line.
DISPOSAL: Do not discard tins or pour paint into water courses, use the facilities provided. It is best to allow paints to harden before disposal.Remainders of Thinner 920 cannot be disposed of through the municipal waste route or dumped without permit. Disposal of remainders must be arranged for in consultation with the authorities.
Unit size 5lt.