International Thinner No.7 1Lt for epoxies
Thinner No.7 is suitable for thinning and/or equipment cleaning in association with: Interprotect®, Gelshield® 200, Gelshield, Etch Primer and for equipment cleaning only in association with Interfill® 400, Interfill 830, Interfill 833, Interfill 835 (for Interprotect, Gelshield 200 (our code COL677, COL678, COL679, COL680), Gelshield Plus (our code COL675, COL676), Etch Primer).
Specific Gravity 0.857
Volume Solids 0%
Typical Shelf Life 2 yrs
VOC (As Supplied) 857 g/lt
Unit Size 1 Lt
5°C (41°F) 10°C (50°F) 23°C (73°F) 35°C (95°F)
Overcoated By Min Max Min Max Min Max Min Max
APPLICATION AND USE
Method: For surface cleaning, turn the cloth frequently to avoid spreading residues.
Ventilation and Humidity Control: Ensure adequate ventilation during use.
Some Important Points: No special restrictions.
Compatibility/Substrates: Suitable for use with polyurethane paints and varnishes.
TRANSPORTATION, STORAGE AND SAFETY INFORMATION
Storage GENERAL INFORMATION:
Exposure to air and extremes of temperature should be avoided. For the full shelf life of this product, ensure that the container is firmly closed between uses and the temperature is between 5°C/41°F and 35°C/95°F. Keep out of direct sunlight.
The product should be kept in securely closed containers during transport and storage.
Read the label safety section for Health and Safety Information, also available from our Technical Help Line.
Do not discard tins or pour paint into water courses, use the facilities provided. It is best to allow paints to harden before disposal.
Remainders of Thinner No.7 cannot be disposed of through the municipal waste route.
Unit size 1Lt.