-
1
Hot-galvanized Steel DANFORTH Anchor. Dimensions: A= 970mm, B= 750mm, C= 570mm. 20kg.
-
2
Joint with forc openable. Tube D.22 mm. Made of stainless steel AISI 316 mirror polished, high quality finishing.
-
3
Hot-galvanized Steel DANFORTH Anchor. Dimensions: A= 525mm, B= 430mm, C= 270mm. 4kg.
-
4
Hot-galvanized Steel DANFORTH Anchor. Dimensions: A= 640mm, B= 465mm, C= 320mm. 6kg.
-
5
Hot-galvanised Steel DANFORTH Anchor, 695x540x370mm, 8kg.
-
6
Hot galvanized cast steel version. Counterweight bar fitted to the shank to improve anchor balance (Norwegian SAV system). Dimensions: 360x330x85mm. 2.5 kg.
-
7
Hot galvanised cast steel version. Counterweight bar fitted to the shank to improve anchor balance. Size: length 420 mm, open diameter 365 mm, closed diameter 100 mm, 3.2kg.
-
8
Hot galvanised cast steel version. Counterweight bar fitted to the shank to improve anchor balance (Norwegian SAV system). 4Kg.
-
9
Hot galvanised cast steel version. Counterweight bar fitted to the shank to improve anchor balance (Norwegian SAV system). 8 Kg.
-
10
Hall type anchor in galvanised stainless steel, fluke angle, classic style and sturdy. Suitable for all types of seabeds. Weight 2,8 kg.
-
11
Hall Anchor made of hot galvanised steel for all type of seabeds, 385x205mm, 6kg.
-
12
Hall Anchor made of hot galvanised steel; classic and sturdy anchors. Suitable for all type of seabeds; fitted with swivelling arm with a wide angle. Length 495mm. Width 230mm. 8kg.
-
13
Trefoil anchor in hot galvanised cast steel. 5Kg. With progressive embedment system. Dimensions: A= 273mm, B= 469mm, C= 310mm.
-
14
Trefoil anchor in hot galvanised cast steel. 7,5Kg. With progressive embedment system. Dimensions: A= 298mm, B= 531mm, C= 360mm.
-
15
Trefoil anchor in hot galvanised cast steel. 10 kg. With progressive embedment system. Dimensions: A= 320mm, B= 583mm, C= 380mm.
-
16
Olive Zinc Anode for Propeller Shaft Fitted with Stainless Steel Pins and Nuts. Dimensions: Hole ∅ 38 mm; 1"1/2.
-
17
Orange horseshoe buoy. NOT APPROVED. Width 53 cm. Height 48 cm. 9 cm thick.
-
18
Yellow horseshoe buoy. Closed-cell Urethane foam core horseshoe ring buoy. With cover and Zip closing. Not approved.
-
19
Stainless steel flagpole base. For flagpole with diameter 14 mm.
-
20
Flagpole made of mirror polished stainless steel. Suitable for flags 20x30 cm. Length 40 cm. Diameter 14 cm.
-
21
NGK Spark Plug. B7HS-10. L82C. Champion correspondences L77JC4. Standard fitting on Mariner, Yamaha, Suzuki, Mercury, Tohatsu, Selva and Honda.
-
22
Galvanised Steel 316 DIN766 calibrated chain Ø6 mm, length 100 mm, breaking load 1630kg.
-
23
DIN 766 Hot dip galvanised steel calibrated chain Ø.8 mm 50 mt. Breaking load 3200 kg.
-
24
Galvanised steel calibrated chain - D.12mm. 50mt. Breaking load 6500kg.
-
25
High resistance G40 High quality calibrated Hot-dip galvanized Steel chain for windlasses.
Minimum breaking load ensured thanks to the strictly controlled production. Ø10mm 50mt, pitch 30x15mm, weight 115kg, breaking load 6500kg.
-
26
Stainless steel calibrated anchor chain Ø6mm 50mt with breaking load 1630kg.
-
27
Stainless steel calibrated chain - D.6mm. 75mt. Breaking load 1630kg.
-
28
Stainless steel calibrated chain - D.8mm. 100mt. Breaking load 3200kg.
-
29
Stainless steel double swivel connector for anchors and chains. Serves to connect chain to the anchor sliding smoothly over anchor rollers, preventing the chain from snagging. 10 mm chain.
-
30
Stainless steel MPP/T mooring shock absorber for boat sizes from 10 to16 mt. Wire Ø10 mm. Breaking Load 10000 kg. Damping Force 610 kg.
-
31
Stainless Steel flat double clamps for wire ropes. For 3 mm wire.
-
32
Plastic 12V Indoor Surface mount 6LED light. Light Colour: White. Dimensions 140x28x15Hmm.
-
33
Plastic 12V Indoor Surface mount 6LED light. Light Colour: White. Dimensions 140x17x24Hmm.
-
34
Seawater strainer in polycarbonate for pumps and engine cooling. L125xh115mm Pots Ø16(5/8")mm
-
35
Stainless Steel Eye Strap. D.4x40mm.
-
36
Stainless steel eye strap. D.6x57 mm.
-
37
Stainless steel eye strap D.8x67 mm
-
38
Stainless steel thimble eye for 5 mm rope.
-
39
Light stainless steel AISI 316 left inclined tee at 60° with rivet hole. For tube D.25 mm.
-
40
Aluminium transom plate. Measures: 315x100cm.
-
41
Hall Anchor in hot galvanised steel; classic and sturdy anchors suitable for all type of seabeds; fitted with swivelling arm with strong angle. 3,7kg. Length 325mm. Width185mm.
-
42
Galvanized chain. D.8mm. 100mt. Breaking load 3200kg.
-
43
High resistance G40 High quality calibrated Hot-dip galvanized Steel chain for windlasses.
Minimum breaking load ensured thanks to the strictly controlled production. Ø10mm 50mt, pitch 30x15mm, weight 115kg, breaking load 6500kg.
-
44
High resistance G40 High quality calibrated Hot-dip galvanized Steel chain for windlasses.
Minimum breaking load ensured thanks to the strictly controlled production. Ø10mm 100mt, pitch 30x15mm, weight 230kg, breaking load 6500kg.
-
45
Galvanised steel calibrated chain. D.8mm. 75mt. Breaking load 3200kg.
-
46
316 Stainless steel calibrated chain. D.10mm. 50mt. Breaking load 5000kg.
-
47
You Save:
€1,133.38 (25%)
316 Stainless steel calibrated chain - D.10mm. 75mt. Breaking load 5000kg.
-
48
Stainless steel thimble eye for 2,5 mm rope.
