Osculati Milano Catalogo Accessori Nautici Accessori Barche

Insulating cap 20mm. Black. For battery cables up to 16mm (external). Made of soft PVC, designed for battery cables and electrical connections with general power. A= 20mm, B= 24mm, C= 18mm, D= 9/16, E= 35mm.

Insulating cap 18 mm red

Insulating cap 20 mm red

Pair of caps for battery clamps

N. 10 Battery clamp caps

Flat fastening plates 90° version. 8mm-threaded pin internal. Size: A= 30mm, B= 50mm, C= 30mm.

Male CEE plug. 220V 16A. Steady polycarbonate case anti-UV inlet with fairlead and cable holder suitable for dock sockets.

Stainless steel snap buttons kit for awnings, canopies, etc. 5 pcs A+B female head buttons Ø17mm and 5 pcs male to fasten under deck Ø14mm.

AISI316 stainless steel male screw eyebolt with turned pin and eye, Ø10x100mm thread, Ø16mm eye.

AISI316 stainless steel male screw eyebolt with turned pin and eye, Ø12x120mm thread, Ø18mm eye.

Belgium flag. Made of polyester, indelible colours. Size: 20x30cm.

Belgium flag. Made of polyester, indelible colours. Size: 30x45cm.

Belgium flag. Made of polyester, indelible colours. Size: 50x75cm.

Netherland Flag. Made of polyester, indelible colours. Size: 30x45cm.

Netherland Flag. Made of polyester, indelible colours. Size: 40x60cm.

Expansion cap in nylon Ø22 mm. Black colour.

Brass Female-Female-Female T-fitting. Ø1/2 inches thread.

Replacement nylon filler for flexible water tanks. Version: Outlet, hose adaptor Ø16 mm.

Heavy brass washer drain. 1-1/4 inches thread.

Chrome plated brass through deck fitting. Thread 1-1/4 inches. Pipe 38 mm.

Sea cock yellow brass with rounded head. Thread Ø1-1/4 inches.

White nylon seacocks with 90° elbow. Thread Ø3/4 inches. Hose connector Ø19 mm.

White nylon seacocks with 90° elbow. Thread Ø1 inch. Hose connector Ø25 mm.

Heavy Duty hose clamp made of AISI 316 stainless steel, designed for heavy duty usage, specially suitable for armoured pipes (exhaust pipes, WC, cooling pipes, etc). Size 48/54mm.

Heavy Duty hose clamp made of AISI 316 stainless steel, designed for heavy duty usage, specially suitable for armoured pipes (exhaust pipes, WC, cooling pipes, etc). Size 54/61mm.

Heavy Duty hose clamp made of AISI 316 stainless steel, designed for heavy duty usage, specially suitable for armoured pipes (exhaust pipes, WC, cooling pipes, etc). Size 65/72mm.

Three-position push-pull switch, long brass neck. 20A. 12/24V.

Perfect watertight seal, complete with 12V 5W Ø40xh75mm bulb for Ø20mm tube, Rina approved for hulls up to 12 meters. White colour.

Chromed brass lever latch 108x50mm.

Chrome-plated brass napkin lifter. Size: 39x45 mm.

U-bolt made of AISI304 stainless steel 60mm, Ø4xh30mm thread, 30mm wheelbase with plate 45x12mm for deck applications.

U-bolt made of AISI304 stainless steel 80mm, Ø5xh40mm thread, 35mm wheelbase with plate 50x13mm for deck applications.

CATERPILLAR Heat Exchanger Sleeve Threaded Zinc Anode for Cooling System. Original Reference: 6L2286. Dimensions: ∅ 28x55+20 mm; Thread 3/4".

CATERPILLAR Heat Exchanger Sleeve Threaded Zinc Anode for Cooling System. Dimensions: ∅ 30x64+20 mm; Thread 3/4".

Oval anode with insert made of galvanized iron to be welded. Length 200mm, Width 100mm, Height 20mm. Weight 3kg.

Complete Zinc Anode for Propeller Shaft. Dimensions: Axis ∅ 40 mm; Standard Thread: 26x2 mm. With Interchangeable Zinc Anode our Code 05430211.

Low Olive Zinc Anode for Propeller Shaft Fitted with Stainless Steel Pins and Nuts. Dimensions: Hole ∅ 19 mm; Thread 3/4"; Thickness 14 mm.