Osculati Milano Catalogo Accessori Nautici Accessori Barche

Pot-holder 3 burners.

Locker latch made of stainless steel, fitted with spring button and padlock ring hole plate.

Anodized aluminium Oar. Length 190cm. Ø 35mm. Fitted with white plastic blade, pole and handle.

Oval pipe handrail. Made of mirror-polished stainless steel. 19x25-mm section, screw external mounting. Length (L) 219mm. L+A 251mm. Height 56mm. Fixing plates 2.

Oval pipe handrail. Made of mirror-polished stainless steel. 19x25-mm section, screw external mounting. Length (L) 305mm. L+A 337mm. Height 55mm. Fixing plates 2.

Watertight inspection hatch with quick opening. External Ø 141mm. Passage 95mm. Made of AISI 316 stainless steel, 1/4 turn opening with winch handle. The cover remains attached to the winch handle on removal for ease of use.

Gasket made of rubber, boat sealing for Volvo Sail Drive legs. Original reference 854932 - 22303438.

Kit including 31 assorted clamps.

Hand-operated winshield wiper made of chromed brass with stainless steel arm and neoprene wiper blade. Brush 280mm. Spare blade N51013801347.

Specific stain remover for boat decks and teak surfaces. It cleans teak from oil, grease, tanning cream, glue, etc. Also suitable for carpets. 200-ml package.

Boat hook. Stainless steel hook. Mirror-lacquered wooden pole. Total length 260cm. Stick Ø 36mm.

Acrylic spray paint for Tohatsu engines. Colour: Dark blue (aquamarine blue). 400ml. Year: All.

IKAROS Hansson Pyrotech MOB. Light 2 cd for 2 hours. Smoke duration: Min. 15 minutes. Size: 200x500mm. Weight 4,8kg. Automatic distress signal + floating smoke light required on fishing boats since 1/1/2004.

Inspection hatch fitted with cover, UNI EN ISO 12216:2004. White. Max external Ø 265mm. Width 190mm. Recess Ø 215mm. Bore centre distance 242mm.

Louvred vent made of ABS plastic. Size 85x85mm. Cream colour.

Couple Dual cone loudspeakers 6.5". Black. Power W - Rms: 60x2. Power W - Max: 120x2. Response frequency Hz: 50-20000. Sensitivity dB: 91. Compass min. distance m: 1,4. D= 180mm, d= 150mm, H= 82mm, h= 61mm. ABS body and polypropylene cone.

Lifting harness for outboard engines. Suggested for engines max 15-35 kg. Fitted with upper handle, universal size for all outboards on sale. Essential for moving outboard engines from the Pram to the pushpit and vice versa.

Teak towel bar. Size 250x60x25 mm.

Hood sleeve coupling with lock pin. For pipe Ø 30mm. Length 85mm. Screw / pin 6mm. Made of mirror-polished AISI 316 stainless steel.

24V 5W bipolar parallel-pole small bulb. BA15D model. 2 pieces pack.

Exhaust for pipe Ø 50mm. A= 51mm, B= 60mm, C= 30mm, D= 85mm, E= 65mm. Made of reinforced technopolymer with polished AISI304 stainless steel finish ring. Hidden screws. Easy mounting. Stainless steel flush design.

Self adhesive waterline tape with special permanent glue, which, once fixed to the hull, dries making the stripe exactly like a painted surface. Very easy application; in a few minutes you will have achieved a perfect job that would normally take hours.

Block for furling system. Rope passage max Ø 12mm. For stanchion Ø 25mm. Made of nylon, with stainless steel sheet passage.

ABS white louvred vent. Size: 201x101mm.

Double fiddle with becket, cam and swivel head. Black nylon and stainless steel reinforced model.

Delrin pulley. White. D1= 56mm, D2= 12,2mm, D3= 12mm, S= 17,6mm.

Zinc Ogive anode with cylindric insert for propeller shafts. Shaft Size ø 20-30mm. ø External 38mm.

Full Flush chromed-brass fuel vent. 90° model. Hose adaptor Ø 16mm. The vent is located in the lower part for a completely closed design.

Hooded watertight windshield wiper with telescopic arm 250/280mm. 12V. Stop angle 110°. Automatic return. Brush 280mm. Stainless steel arm and blades.

End cap for pipe Ø 20mm. Made of mirror polished AISI 316 stainless steel, high quality finish.

Marina R toggle switch, watertight. Function: ON-OFF-(ON) for bilge pumps (automatic and manual mode). 12/24V. 4 terminals. Toggle included.

Marina R toggle switch, watertight. Function: ON-OFF. 12/24V. 3 terminals. Toggle included.

Marina R toggle switch, watertight. Function: ON-OFF with spring return. 12/24V. 3 terminals. Toggle included.

Marina R toggle switch, watertight. Function: (ON)-OFF-(ON) for: flaps, trim tabs, gangways, etc. 12/24V. 6 terminals. Toggle included.

Marina R toggle switch, watertight. Function: ON-OFF-ON for 2 separate circuits (navigation and masthead lights or to switch the bilge pump from manual to automatic mode). 12/24V. 4 terminals. Toggle included.

Marina R toggle switch, watertight. Function: (ON)-OFF-(ON) for: hydraulic gangways, anchor winches, flaps. 12/24V. 4 terminals. Toggle included.

Marina R toggle switch, watertight. Function: ON1 - OFF - ON1+2; ON1 = circuit 1 ON1+2 = circuit 1+2 Navigation lights for hulls up to 12 m: ON1 = white 360° ON1+2 = white 360°+red/green 112°,5. 12/24V. 4 terminals. Toggle included.

EPDM carrying Straight handle. Black. Size: 250x110mm. Height 48mm.

Mares silicone mask, Vento model. Junior size. Blue White/Clear colour. Silicone mask for perfect adaptability and tempered glass lens for scuba diving.

Mares silicone mask, Vento model. Adult size. Black colour. Silicone mask for perfect adaptability and tempered glass lens for scuba diving.

Professional antifog swimming goggles, ideal for swimming in the sea or at the swimming pool. Adult size.

Mares mask and snorkel set, Zephir model. Reflex Yellow/Clear colour. PVC mask and snorkel set for scuba diving beginners. Junior size.

Mares mask and snorkel set, Zephir model. Reflex Blue/Clear colour. PVC mask and snorkel set for scuba diving beginners. Adult size.

Stand Up Paddle JOBE Desna 10.0 Package. Size: 305x81x12cm. Volume 238l. Pressure 20psi. Weight 8kg. Includes: 10.0" SUP board, Adjustable paddle, nkle leash, Manual pump, Carrying bag, Repair kit.

Sup 300. Volume 273L. Pressure 15PSI. Size: 300x75x12cm. It comes with paddle, manual inflater, carrying bag and repair kit.

Delux SUP board or gangplank holder kit made of stainless steel for pipe Ø 20/28mm, 230x115mm, to be mounted to the railing by means of 360° adjustable stainless steel clamps.

Two chamber Foot Pump BRAVO 10. Max pressure: 800mbar. Tank - chamber 1: 5l. Tank - chamber 2: 1.65l. Pressure gauge: YES. Size: 280x210x60mm.

BRAVO 6 inflator. Version: Continuous flow / simple flow. Max pressure 600 mbar (8.7 psi). Tank 6l. Pressure gauge: No. Size: 210x120x470mm.