Owatrol Deks Olje D.1 is an oil, which saturates the wood, literally feeding it with oil to replace those lost. Driving out moisture and air, filling the woods pores with oil, it enriches and stabilises to provide long lasting protection to interior and exterior timber. A non-film forming, clear oil DEKS OLJE® D.1 enhances the natural beauty of the wood while being easy to maintain, requiring no sanding or stripping.
Properties
• Optimised for thick, dense, oily and difficult to impregnate woods.
• Drives out moisture and air by penetrating deep into the wood pores.
• Protects against humidity and its effects.
• Transparent - Maintains the woods natural appearance.
• Natural matt sheen finish (For a gloss finish topcoat with DEKS OLJE® D.2*).
• Non film forming - No peeling, No flaking.
• Easy maintenance - No stripping or sanding.
• Can be applied above and below the water line.
Basic Uses
• Exterior and Interior use - Decks, Hulls, Trim, Wheel House, Furniture...
• Horizontal and Vertical surfaces.
• Hardwoods (Exotic and Broad Leaved) - Oak, Chestnut, Iroko, Teak, Mahogany...
• Softwoods - Pine, Larch, Cedar...
• Excellent primer for conventional single pack marine coatings.
Techinical data
Finish: Matt
Vehicle type: Alkyd-Urethane Resins
Solvent type: Solvent
Viscosity: Fluid
Specific gravity (at 20°C): 0,850 ± 0,05
Physical state: Liquid
Solid content: 27 % ± 2
Flash point: > 60°C
Shelf life: 2 years in original unopened packaging
Container size: 2.5L
Colour: Amber
Dry time: 24 hours, depending on temperature and humidity.
Setting up time before use or finishing with DEKS OLJE® D.2*: 3 days
VOC: EU limit value for this product (cat. A/f) 700 g/L (2010). This product contains max. 628 g/L.
