Rule-Mate RM 500A automatic submersible bilge pump 500GPH
Suitable for smaller boats; Fully automated bilge pump with integral float switch that checks the bilge water level every 5 minutes and automaticcaly switches on in the presence of water. When the water level drops to approx 20mm (level at which the pump automatically switches off) the pump will work for 15 seconds in order to remove as much water as possible. This will also drastically remove bad smells and stagnant water.
Power supply 12V. Absorption 2,5A. Delivery capacity 30 Lt/min. Hose connector D.3/4".
Dimensions: H 12cm, Length 19cm, Width 9cm.

Note: The automatic system does not work if there is oil in the bilge.