Terminal Blocks and Ground plate

Pair of battery clamps series «Extra» positive and negative. Made of Galvanized steel.

Pair of battery clamps series «Extra» positive and negative. Made of Brass.

Ground plate in porous bronze. Length 155 mm. Width 51 mm. Distance between holes 13 mm. Nuts 2xM6. Weight 0,5 kg.

Bakelite box for terminal blocks, completely sealed with screw fitted cover. 8 contacts. 127x76x44H mm.

12 pole terminal block 6sqmm.

Mobile terminal block with 1 hole for 1.5sqmm cable. 10 pieces.

Mobile terminal block with 1 hole for 2.5sqmm cable.

Mobile terminal block with 1 hole for 4sqmm cable. 10 pieces.

Mobile terminal block with 1 hole for 6sqmm cable. 10 pieces.

Terminal board 10 terminals capacity 20A. Dimensions: 130x30x15. Fitted with nickel plated brass terminal clamps. Separators to avoid accidental contacts.

4 Gang Terminal block 20A Capacity. Fitted with nickel plated brass terminal clamps. Separators to avoid accidental contacts.

Electrical cable terminal for 6 terminals 30A.Size: 90x30mm. Made of black plastic, fitted with clear protection cover. Separators for unwanted contacts, nichel-plated brass terminals.

Electrical cables terminals. Made of black plastic, fitted with clear protection cover. Separators for unwanted contacts, nichel-plated brass terminals. 10 terminals. 30A. Size: 138x30mm.

4x5 Bus-Bar electric terminal board, high insulating capacity plastic baseh nickel-plated cooper support bar, stainless steel screws and nuts. Volt 12/48.

Bus-Bar electric terminal board. Shunt terminal 5x4mm. Power terminal 2x5mm. Base 107x22mm. A continuous capacity: 100.

Bus-Bar electric terminal board. Shunt terminal 20x4mm. Power terminals 2x6mm. Base 225x31mm. 150A continuous capacity. OPTIONAL Cover OS1420820.

Bus-bar electric terminal board 4 x 6 mm

Power terminal: 6x6 mm. Base: 230x32 mm. Continuous capacity: 150A.

Bus-Bar cover for electric terminal board, size 107x22mm

Bus-Bar cover 145x31mm for code OS1420710.

Bus-Bar cover 225x31mm for code OS1420712.

Bus-Bar cover 152 x 32 mm

Bus-Bar cover 230x32mm for electric terminal board 6x6mm.

Watertight shunt box 3 input. Input: 3 (2 medium,1 small). Clamps: 8 (4+4). Size: 76x127x45mm. Black plastic.

Electrical shunt boxes, watertight. Input: 6 (2 small, 2 medium, 2 large). Clamps: 16 (8+8). Size: 140x100x53mm. Black plastic.

8 pole terminal board, 14A, 100% watertight. Max 14A. Size: 108x92x41mm. Clear polycarbonate cover, salt water-resistant rubber body; ideal for bilge connections or for use in engine rooms.

BIG battery terminals for high amperage. Made of nickel-plated brass with stainless steel nuts and bolts. + and - fastening bolts to avoid confusing the cables.

Bronze battery clips packed in pairs, universal model; selected pins sizes 8 and 10 mm used to avoid inverting battery cables; version fitted with stainless steel pins and screw nuts.

Pair Universal snap mounting battery terminals. Blue and Red. Made of polypropylene, chromed brass and AISI316 stainless steel. Universal for all batteries, suitable for cables up to 40 mm2, max 800 amp.

Couple of medium sized crocodile clips with rubber sheath for cables, length (sheath not included) 35 mm, maximum aperture 10 mm.

GROUNDPLATE mass plates equipped with special nuts and bolts. Type Giant. Equal to copper grounding 3,45m2. Size: 300x80x13mm. Made of porous bronze, ideal for achieving an appropriate mass while installing Loran, GPS, Satellites, radio-telephones SSB..

GROUNDPLATE mass plates equipped with special nuts and bolts. Type medium. Equal to copper grounding 2m2. Size: 205x64x13mm. Made of porous bronze, ideal for achieving an appropriate mass while installing Loran, GPS, Satellites, radio-telephones SSB..

Terminal board 6 terminals. Fitted with nickel plated brass terminal clamps. Separators to avoid accidental contacts.

Bus-bar electric terminal board. Shunt terminal 10x4mm. Power terminals 2x6mm. Base 145x31mm. 150A continuous capacity.

Rib insulator with Nickel-plated Brass terminals. Each screw pair form one isolated circuit. 6 terminals. Capacity 20A.

Rib insulator with Nickel-plated Brass terminals. Each screw pair form one isolated circuit. 8 terminals. Capacity 20A.

Reinforced plastic waterproof electric connection box with rubber wire and cover seals. Terminal blocks for wires up to 4 mm2. 4+4 Terminals. Size: 130x76xH45mm.

Reinforced plastic waterproof electric connection box with rubber wire and cover seals. Terminal blocks for wires up to 4 mm2. 8+8 Terminals. Size: 140x100xH54mm.

Terminal block for electrical installations. 8 terminals. Base: 83 x150mm.

Covers for battery terminals made of rubber.