The Smart BMS LiFePO4 battery is definitely the best alternative to 51.2V lead-acid batteries because they have a stable supply voltage even under heavy load. Offering the advantages of lithium: light weight, stable voltage, high cycle count. It can directly store more than 96% of the supplied energy. High performance even in extreme conditions. Deep and constant discharge and recharge efficiency.
The battery charge monitoring system (commonly called Battery Management System or BMS) allows intelligent management of the range and safety of an e-mobility vehicle, in turn reducing power costs. The BMS manages the entire array of lithium cells (single cells or entire battery packs), establishing a safe operating area, i.e. a safety area within which the battery pack guarantees the best technical and energy performance. The BMS is basically an electronic system for the complete control of all the diagnostic and safety functions for the management of the voltage on board the vehicle and the balancing of the electric charge.
The fields of application of lithium batteries are diverse, especially for stationary or mobile use. In particular, mobile homes, solar boats, electric boats, electric scooters, golf cars or even electromobiles/wheelchairs and cleaning machines are increasingly equipped.
Mountable On Wall as Power Wall and On Ground as Cabinet for quick and easy installation in more applications.
Electrical performance:
- Battery type: Lithium Iron Phosphate LiFePO4;
- Nominal Voltage: 51.2V;
- Nominal Capacity: 200Ah;
- Storage Energy: 10240Wh;
- Max Charge Voltage: 58.4V;
- Over Discharge Voltage: 40V;
- Max Charge Current: 100A;
- Max Discharge Current: 120A;
- Life Cycle: >6000;
- Number of cycles: over 7000 with 80% DOD discharge;
- BMS: 48V 16S 120A BMS;
- Communication Interface: CAN,RS485，RS485;
Temperature performance:
- Charging temperature: 0 to 45℃;
- Discharge temperature: -20 to 60℃;
- Storage temperature: 0 to 45℃;
Mechanical performance:
- Display: LCD;
- LiFePO4 cell: A+ grade;
- Terminal Type: M8/Anderson;
- Case Material: Metal;
- Enclosure Protection: IP55;
- Dimensions (L x W x H): 850x460x350 mm;
- Weight approx. 93.5 kg.
IMPORTANT NOTE:
The reduced VAT (10%) is reserved for PRIVATE INDIVIDUALS, end users and qualified photovoltaic and thermal energy installers or heat production INSTALLED IN ITALY. In case you do not have the right to the tax deduction (DEALERS) kindly contact us in advance so that an invoice with 22% VAT can be issued as per the law in force. In the absence of receipt of the declaration the order cannot be shipped as a copy of the VAT declaration form must by law be attached to the company invoice. The declaration form and ID document must be sent to the email address.
After purchase, kindly complete and return the VAT declaration form together with a copy of an ID document.