Veneziani Gel Gloss Pro Enamel A+B 0,75 Lt Oyster White 035 #473COL304

Veneziani Gel Gloss Pro Enamel  A+B 0,75 Lt Oyster White 035 #473COL304

Veneziani Gel Gloss Pro Enamel A+B 0,75 Lt Oyster White 035 #473COL304

High quality enamel with excellent resistance to industrial and marine atmosphere, aging and ultraviolet rays. Non-yellowing, excellent chemical and mechanical resistance and gloss retention.
Price:
€64.33
Listing:
€75.68
You Save:
€11.35 (15%)

Description

MORE INFORMATION

GEL GLOSS PRO ENAMEL 

Gel Gloss Pro is a two-component polyurethane finish. A high quality enamel with excellent resistance to marine and industrial environment, to ageing and to ultraviolet rays. Does not yellow, is very flexible and retains its gloss. Excellent levelling gives improved aesthetic appearance to topsides, decks, superstructures etc. Gel Gloss Pro can be applied directly to gel coats or to epoxy or polyurethane primers (Epoply,Polygoal). A wide range of colours, which can be blended, is available. Not suitable for continuous water immersion.
Excellent expansion giving an improved aesthetic appearance to topsides, decks, superstructures with specular and shiny surfaces.
Direct application on gel coats or epoxy or polyurethane Plastolite Pro (our code COL222, COL2222), Polyrex Pro (our code COL208, COL209).
A wide range of colours, which can be blended, is available. Not suitable for continuous water immersion.
Application of 2 coats (3 for more coverage) is recommended.
Theoretical yield of 13.5 sqm/lt.
Specific gravity 1.29.
Minimum recoating time 7 hours at 20 ° C.
Recommended thinner 6700, our code COL255, for spray application; for application by roller or brush thinner 5780 is recommended, our code COL252.
Not suitable for continuous immersion.
Unit size 0.75 lt.

TECHNICAL DATA
Specific weight: 1.29 ± 0.02 Kg / L
Solids by volume: 54%
Colour: refer to colour chart
Unit size: 0,75 L / 2,50 L

APPLICATION: Apply with: brush - roller - conventional - airless spray
Drying time at 20°C: 7 hours
Pot life (20 ° C): 3-4 hours
Mixing ratio by volume: 3: 1 ratio by weight: 80: 20
Thinner: 6700 (Spray - Airless) or 6780 (roller - brush)
Thickness dry film per coat: 35-40 μ
Theoretical coverage per coat: from 15.4 to 13.5 m2/L
Recoating time at 20 ° C: min 3-4 hours max 48 hours
Number of coats: 2 (3 for more coverage )
- GREAT EXPANSION SPRAY AND BRUSH
- EXCELLENT MECHANICAL AND CHEMICAL RESISTANCE
- MAINTAINS GLOSS
- GOOD COVER
- CAN BE MIXED WITH OTHER COLOURS
- NON-SLIP FINISH WITH ADDITIVE

Unit size 0,75Lt.
Colour: Oyster White 035.