Synthetic microfibers are part of the additive range to be used in addition to RESINA 3+, to obtain compounds with different characteristics. They have an average length of 500 microns and, when mixed with RESINA 3+, reinforce its structure by creating a multidirectional network within the compound; at the same time, being low absorption, they do not alter the penetration characteristics in the RESINA 3+ surface. They can be used for "fillet" type structural bonding (for boding "T" joints) where a high density structural filler and strong structure is required.
TECHNICAL SPECIFICATIONS
Product code: W6711
Colour: White .001
Solids (by volume): ASTM D2369 100%
Pack: 0,75 Lt
APPLICATION PROCEDURE
Add the additive to RESINA 3+ only after carefully mixing component A and component B in a 2:1 ratio.
Fluid glue: Mix 2 parts of catalyzed RESINA 3+ + 1 part of R-Fibers to obtain a fluid glue suitable for gluing surfaces with small imperfections.
Structural bonding: Mix 1 part of catalyzed RESINA 3+ + 1 part of R-Fibers to obtain a light structural compound suitable for bonding surfaces with large imperfections.
High-density structural bonding: Mix 1 part of catalyzed Resin 3+ + 2 parts of R-Fibers to obtain a high-density structural compound capable of remaining in position even in vertical applications.