Protective impregnating agent for coloured and natural wood. It penetrates the wood, altering its appearance in the variety and in the desired shade. Its formulation provides excellent protection against the elements, fungi, mould and insects. It is recommended on boats for both indoor and outdoor cycles, for varnishing all types of wood.
Application: brush.
TECHNICAL SPECIFICATIONS
Theoretical coverage: 30,0 m2L
Recoating time: wet on wet 2h (20° C)
Hard dry: 10h
Thinner: 6470
Colour: .376 teak
SURFACE PREPARATION
New or refurbished wood: The humidity of the wood must not exceed 18%, sand the surface thoroughly with paper n. P120 - P180, before proceeding with the application of S-Protect, blow with clean and dry air to remove any residual sanding and dirt. The substrate must be sound, dry, free from traces of dirt, grease, resin, and old paints.
Apply the first coat of S-PROTECT, neutral or colored; if the wood is very resinous, dilute the product at 15-20% and then apply a further coat of S-PROTECT (neutral or colored).
WOOD PROTECTED WITH S-PROTECT, IF EXPOSED OUTSIDE, MUST BE TREATED WITH PAINTS FROM THE VENEZIANI RANGE
Pack 750 ml.