Osculati Milano Catalogo Accessori Nautici Accessori Barche

Horizontal silencers for water-cooled engines. Size: A= 183mm, B= 135mm, C= 460mm, D= 90mm. Made of HD polyethylene.

Horizontal silencers for water-cooled engines. Size: A= 183mm, B= 135mm, C= 460mm, D= 102mm. Made of HD polyethylene.

Exhaust muffler-waterlock with inlet turned downwards. Size: 480x110mm. Suitable for exhaust hoses 40/45/50mm. Suitable for water-cooled engines, made of high density polyethylene.

Exhaust muffler-waterlock with 120° inlet. Size: 480x110mm. Suitable for exhaust hoses 40/45/50mm. Suitable for water-cooled engines, made of high density polyethylene.

Exhaust muffler for water-cooled engines. Max power 150HP. Mouths 75/90mm. Capacity 33L. Length A= 370mm, Length B= 760mm, height C= 400mm, width D= 290mm.

Exhaust muffler for water-cooled engines. Max power 300HP. Mouths 100/115mm. Capacity 33L. Length A= 370mm, Length B= 760mm, height C= 400mm, width D= 290mm.

Water/gas separator 2,5 litres. Gas inlet/outlet fittings 40/45/50mm. Water inlet/outlet fittings 38/15mm. A= 200mm, B= 110mm.

Water/gas separator 4,5 litres. Gas inlet/outlet fittings 40/45/50mm. Water inlet/outlet fittings 38/15mm. A= 260mm, B= 160mm.

Antisiphon device to be used on exhaust lines, seawater connectors and WCs installed under the floating line. Hose adaptor Ø 13/19/25/32 (1/2"-3/4"-1"-1"1/4)mm. Size: 92x150mm.

Voltage electronic converter. V - input: 20-30. V - outlet: 13,5±0,5. A continuous: 7. Type: Linear. Efficiency: 85%. Size: 100x100x60mm. It can lower the voltage from 24V to 12V.

Fuel primer bulb. Ø 47,5mm. Length 145mm. For fuel hoses Ø 6/8/10mm. Made of special technopolymer. Fitted with removable 6/8/10-mm Ø fittings.

Stainless steel spring for fuel hose fitting to connector or primer. 4 pieces.

Universal ground plate for fuel tanks Ø 55mm. Made of porous bronze, designed for fuel tanks, essential for unloading static electricity that may spark off into the fuel causing an explosion during re-fuelling.

Fuel connector Ø 8mm 5/16". Length 51mm. Double brass connector to connect the tank to the outboard engine. Universal.

Fuel connector Ø 10mm 3/8". Length 51mm. Double brass connector to connect the tank to the outboard engine. Universal.

Starting key with pressure starter, with no accessory position, same as General 3976, Johson/Evinrude 333931/390133/390129/388175. 6 terminals. Position 3 (OFF - IGN - START).

Propeller puller for shaft lines 25mm to 38mm (1" - 1"1/2). Suitable for 2 to 5 blade propellers. Made of high-resistance steel.

Propeller puller for shaft lines 40mm to 52mm (1" 5/8- 2"). Suitable for 2 to 5 blade propellers. Made of high-resistance steel.

Special universal keys. Designed to screw/unscrew propeller's studs, length of 330 mm; made of nylon/fiberglass.

Shaft line bushings made of rubber. External/internal version in millimetres. Ø A 22mm. Ø B 29mm. C 75mm.

Shaft line bushings made of rubber. External/internal version in millimetres. Ø A 22mm. Ø B 36mm. C 80mm.

Shaft line bushings made of rubber. External/internal version in millimetres. Ø A 25mm. Ø B 36mm. C 100mm.

Shaft line bushings made of rubber. External/internal version in millimetres. Ø A 25mm. Ø B 40mm. C 120mm.

Shaft line bushings made of rubber. External/internal version in millimetres. Ø A 30mm. Ø B 40mm. C 120mm.

Shaft line bushings made of rubber. External/internal version in millimetres. Ø A 35mm. Ø B 54mm. C 140mm.

Shaft line bushings made of rubber. External/internal version in millimetres. Ø A 40mm. Ø B 54mm. C 140mm.

Stainless steel line clamp cutter. Axis Ø 25mm. Outer Ø 80mm. Thickness 22mm. The clamp system enables to install the cutter without disassembling the propeller.

Stainless steel line clamp cutter. Axis Ø 30mm. Outer Ø 80mm. Thickness 22mm. The clamp system enables to install the cutter without disassembling the propeller.

Stainless steel line clamp cutter. Axis Ø 31,75mm (1" 1/4). Outer Ø 80mm. Thickness 22mm. The clamp system enables to install the cutter without disassembling the propeller.

Stainless steel line clamp cutter. Axis Ø 35mm. Outer Ø 100mm. Thickness 22mm. The clamp system enables to install the cutter without disassembling the propeller.

Stainless steel line clamp cutter. Axis Ø 40mm. Outer Ø 100mm. Thickness 22mm. The clamp system enables to install the cutter without disassembling the propeller.

Stainless steel line clamp cutter. Axis Ø 44,5mm (1" 3/4) (A). Outer Ø 120mm. Thickness 22mm. The clamp system enables to install the cutter without disassembling the propeller.

Stainless steel line clamp cutter. Axis Ø 45 (A). Outer Ø 120mm. Thickness 22mm. The clamp system enables to install the cutter without disassembling the propeller.

Stainless steel line clamp cutter. Axis Ø 50 (A). Outer Ø 120mm. Thickness 22mm. The clamp system enables to install the cutter without disassembling the propeller.

Rubber stuffing box. Centerline Ø 25mm. Stuffing box case Ø 43mm. Long lasting insulation from water seepage, low maintenance required if correctly treated. Made of a special type of rubber resistant to salt water and lubricating grease.

Rubber stuffing box. Centerline Ø 30mm. Stuffing box case Ø 49mm. Long lasting insulation from water seepage, low maintenance required if correctly treated. Made of a special type of rubber resistant to salt water and lubricating grease.

Rubber stuffing box. Centerline Ø 35mm. Stuffing box case Ø 55mm. Long lasting insulation from water seepage, low maintenance required if correctly treated. Made of a special type of rubber resistant to salt water and lubricating grease.

Rubber stuffing box. Centerline Ø 40mm. Stuffing box case Ø 60mm. Long lasting insulation from water seepage, low maintenance required if correctly treated. Made of a special type of rubber resistant to salt water and lubricating grease.

Rubber stuffing box. Centerline Ø 45mm. Stuffing box case Ø 65mm. Long lasting insulation from water seepage, low maintenance required if correctly treated. Made of a special type of rubber resistant to salt water and lubricating grease.

Rubber stuffing box. Centerline Ø 50mm. Stuffing box case Ø 70mm. Long lasting insulation from water seepage, low maintenance required if correctly treated. Made of a special type of rubber resistant to salt water and lubricating grease.

Rubber stuffing box. Centerline Ø 25mm. Stuffing box case Ø 43mm. Long lasting insulation from water seepage, low maintenance required if correctly treated. Made of a special type of rubber resistant to salt water and lubricating grease.

Rubber stuffing box. Centerline Ø 30mm. Stuffing box case Ø 49mm. Long lasting insulation from water seepage, low maintenance required if correctly treated. Made of a special type of rubber resistant to salt water and lubricating grease.

Rubber stuffing box. Centerline Ø 35mm. Stuffing box case Ø 55mm. Long lasting insulation from water seepage, low maintenance required if correctly treated. Made of a special type of rubber resistant to salt water and lubricating grease.

Rubber stuffing box. Centerline Ø 40mm. Stuffing box case Ø 60mm. Long lasting insulation from water seepage, low maintenance required if correctly treated. Made of a special type of rubber resistant to salt water and lubricating grease.

Rubber stuffing box. Centerline Ø 45mm. Stuffing box case Ø 65mm. Long lasting insulation from water seepage, low maintenance required if correctly treated. Made of a special type of rubber resistant to salt water and lubricating grease.

Rubber stuffing box. Centerline Ø 50mm. Stuffing box case Ø 70mm. Long lasting insulation from water seepage, low maintenance required if correctly treated. Made of a special type of rubber resistant to salt water and lubricating grease.

Portable pressure Handy Shower. Fitted with ABS container that can hold up to 8 litres of water, push button shower and 1,7 meter hose, pressure piston

Fresh Water Rigid Tank 105 liters. Base 900x400mm. Height 300mm. Standard thickness 4,5mm +/- 5%.