Osculati Milano Catalogo Accessori Nautici Accessori Barche

Stainless Steel flagpole - Chrome plated ABS base - L.40cm

Flagstaff, pushpit or handrail mounting. Made of mirror polished stainless steel; includes flag mounting rings and safety terminal ball. Length 40cm. For pipes/handrails Ø 22/25mm.

Teak flagpole - L.50cm

Teak flagpole - L.75cm

Teak flagpole - L.90cm

Teak flagpole - L.120cm

Italian flag sticker for boats. Dimensions 20x30 cm.

Italian flag sticker for boats. Dimensions 15x22 cm.

International signal code sticker with symbols - 16x24cm

Nautical knots sticker. Dimensions 16x24 cm.

Compass-rose/Rose of the Winds sticker D.15cm

Low cost recess fitting fishing rod holder - Internal D.40mm - White

Totally made of mirror-polished AISI 316 stainless steel with plastic protection bushing. Adjustable from 90° to 15°. Base 82x72mm. Bore D.39mm. Height 325mm.

Stainless steel rod holder w/cap - Inner D.40mm

Stainless steel swivel pedestal adjustable in height from 45 to 62cm. Base D.230 mm, pipe D.80/73mm. Made of anodised light alloy and fitted with antifriction nylon bushings.

Stainless steel Swivel pedestal adjustable in height from 45 to 62 cm. Base D.230 mm, pipe D.80/73 mm. Made of anodised light alloy and fitted with antifriction nylon bushings. Nylon Seat mount.

Pair of stainless steel extractable angle brackets for tables

Telescopic table pedestal - 56/78cm

Battery container max 120A with straps and fixing jumpers, white/yellow, 384x177x205mm.

Cabling coil. Electric cable protective belts, entry and exit at any point. wiring Ø 2-15mm. Roll 5m.

Cabling coil. Electric cable protective belts, entry and exit at any point. Wiring Ø 7-40mm. Roll 5m.

Electric cable protective belts, entry and exit at any point. Wiring Ø 13-70mm. Roll 5m.

Terminal board 4 terminals

Terminal board 6 terminals. Fitted with nickel plated brass terminal clamps. Separators to avoid accidental contacts.

Bus-bar electric terminal board. Shunt terminal 10x4mm. Power terminals 2x6mm. Base 145x31mm. 150A continuous capacity.

Stainless steel swiveling mount for navigation lights - Tube D.22/25mm

Splash-proof screen protection. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation. Hose adaptor Ø16 mm.

Stainless steel deckfill - Fuel - D.50mm

Stainless steel deckfill - Water - D.38mm

Bi-square composite handle for deck fillers

Back vent - Hose adapter 25/32/38mm

Back vent - Hose adapter 13/20/26mm

Vented Loop syphon. Type: discharge manual wc. Hose fitting D.38 mm - 1-1/2".

Vented Loop syphon. Type: Load for manual wc. Hose fitting D.19 mm - 3/4".

Vented Loop syphon. Type: Discharge electric WC. Hose fitting D.25 mm - 1".

Drain for skin made of white nylon. Bent type 90°. Ledge Ø50 mm. Hose fitting D.28 mm.

Drain for sink made of white naylon. Straight type. Hose fitting Ø28 mm.

Bushing with valve for inflatable boats with plug. Hole Ø36 mm.

Telescopic spout made of aluminium and nylon for sinks, etc.

Submersible Bilge pump 1000GHP - 12V - 63Lt/min - Model 20F

Rule 2000 12V submersible pump. Flow 135 l/min. Current draw 12A. Height 150mm. Base Ø 110mm. Inlet Ø 29mm.

Rule 2000 24V submersible pump. Flow 135 l/min. Current draw 6,5A. Height 150mm. Base Ø 110mm. Inlet Ø 29mm.

Rule 3700 large submersible pump 12V 15,5A. Flow 237 l/min. Head 6,3m. Inlet Ø 38mm. Height 184mm. Base 120mm. Rule 14A.

Rule 3700 large submersible pump 24V 7A. Flow 237 l/min. Head 6,3m. Inlet Ø 38mm. Height 184mm. Base 120mm. Rule 16A.

Whale in line submersible pump for salt and fresh water, diesel. Delivery capacity 11 Lt/min. Hose connector D.10-13 mm. Power supply 12V. Current draw 3A.

Europump 4 Low Consumption Fresh Water Pump 12V 2A Ø10mm, 170x100x60mm, capacity 3l/m and 2.45 bar.

Can run dry without getting damaged, no vibrations, very quiet; fitted with internal by-pass that moderates the pressure control; permanent-magnet motor with self-lubricating shaft; thermal protection against accidental overheating.

Europump Self-primming Pump Fitted with 3 Valves 12V/6A 11 l/min 3 Bar