-
1
PSP Tell Tales wind indicator strips for sail trimming. Pack content: 16 x self-adhesive discs, 8 x red strips, 8 x blue strips, 16 x self-adhesive strips.
Permanent wind indicator strips.
-
2
Made of durable reinforced PVC. Adjustable safety tapes and hooks tested to 300kg. Tool pocket. Folds back on itself for minimum bulk on board.
-
3
PVC riggin screws cover - L380xD6-7mm
-
4
Red fairlead for carbon fiber ball bearing cam cleat 5/14mm.
-
5
Reduction bushing for pipe Ø 17mm inner side.
-
6
Reinforced fork joint for hose Ø 30mm. Mirror-polished AISI 316 stainless steel.
-
7
Reinforced terminal cap for hose Ø 30mm. Mirror-polished AISI 316 stainless steel.
-
8
Removable joint for elastomer stick, suitable for pipe Ø 13mm inner part.
-
9
Rig Angel mainsheet shock absorber. Operating load 800kg. Breaking load 4000kg. Recommended for boats 9/11m. Made of Dyneema tape, with energy absorber that slows down the boom in the event of an accidental gybe. Simple to install.
-
10
Rigging screw s.s. turned - D.12mm
-
11
Rigging screw s.s. turned - D.5mm
-
12
Rigging screw s.s. turned - D.8mm
-
13
Rigging screw s.s. turned rod metal - D.6mm
-
14
Rigging screw s.s. turned w/swage terminal - Rope 5mm - D10mm
-
15
Supports the boom at all times. Prevents accidents when the topping lift is incorrectly set or adjusted. Fits all types of mast and boom extrusions.
-
16
Supports the boom at all times. Prevents accidents when the topping lift is incorrectly set or adjusted.
-
17
Supports the boom at all times. Prevents accidents when the topping lift is incorrectly set or adjusted.
-
18
Supports the boom at all times. Prevents accidents when the topping lift is incorrectly set or adjusted. Fits all types of mast and boom extrusions.
-
19
Supports the boom at all times. Prevents accidents when the topping lift is incorrectly set or adjusted.
-
20
Rudder fitting - Pintles and Gudgeons. Made of stainless steel and aluminium. For wheel thickness 12mm. Bracket 75mm - short. Bracket 108mm - long. Suitable for boats 3/4m.
-
21
Rudder fitting - Pintles and Gudgeons. Made of stainless steel and aluminium. For wheel thickness 35mm. Bracket 132mm - short. Bracket 179mm - long. Suitable for boats 5/6m.
-
22
48x73-mm wall mount support made of mirror polished AISI 316 stainless steel, high quality finish. For pipes: D.25mm; D.25mm Heavy Duty.
-
23
90° external swivelling joints suitable for awning pipes, made of mirror polished AISI 316 stainless steel. For pipe Ø 22mm.
-
24
90° fork articulated joint made of mirror polished AISI 316 stainless steel, high quality finish.For pipes: D.25-mm Heavy Duty; D.30mm.
-
25
Made of mirror polished AISI 316 stainless steel, high quality finish. For pipes: diameter 25-mm Heavy Duty. Fork articulated joint.
-
26
S.S. fork terminal for PARAFIL wire - D.9mm
-
27
S.S. handrail eye terminals - for stanchion D.6mm
-
28
S.S. handrail eye terminals for stanchion D.8mm
-
29
S.S. mast foldable step
-
30
Stainless steel plate + stainless steel cable Ø size 1.6 mm + stainless steel pin. Version with spring ball locking pin. Used to remove boat hoods, suitable for all of our hood fork supports.
-
31
Stainless steel plate + stainless steel cable Ø size 1.6 mm + stainless steel pin. Version with spring folding pin. Used to remove boat hoods, suitable for all of our hood fork supports.
-
32
S.S. press-fitting rigging screw for D.6mm cable
-
33
S.S. rigging screw w/Parafil terminal - D.7mm
-
34
S.S. Turned Rigging Screw w/Swage Terminal - Rope 3mm - D.6mm
-
35
Stainless steel foldable step. Base 45x110 mm. Step 50x85 mm. Folded overhang 21 mm.
-
36
A special 210D nylon seat with a 0.35mm thick PVC coating, with safety straps, handy tool pockets and a wooden seat covered with soft padding.
-
37
Sail batten terminal 15x3mm
-
38
Sail repair kit
-
39
Sail repair patch kit: Two self-adhesive rectangular tapes 24x37cm each suitable for repairing large gears, to be applied on both sides of the sale. Blue colour. In Dacron.
-
40
Sail repair patch kit: Two self-adhesive rectangular tapes 24x37cm each suitable for repairing large gears, to be applied on both sides of the sale. White colour. In Dacron.
-
41
Sail repair patch kit: Two self-adhesive rectangular tapes 24x37cm each suitable for repairing large gears, to be applied on both sides of the sale. Light blue colour. In Dacron.
-
42
Sailguard - Pair Sail-saver made of white nylon
-
43
Sea Sure jib furling system with manual return line. Suitable for: All types of keels. Drum Ø 69mm. Made of stainless steel, fitted with nylon pulley.
-
44
Self locking joint - Tube D.20mm - Black
-
45
Self locking joint - Tube D.20mm - White
-
46
Self locking joint - Tube D.22mm. Black colour.
-
47
Self locking joint. Tube diameter 22 mm. White colour.
-
48
Self-amalgamating PVC tape - Black - H25mm x L3mt