Trem

Pair storage racks in white plastic, with fixing bracket. 4 fishing rod model.

Transom guard in flexible plastic material. Suitable to protect both interior and exterior of sterndrive. Dimensions 40x28 mm. Grey color.

Funnel for pouring fuel with built-in extension, made in plastic and supplied with filter, mouth diameter 150mm.

Container with cover supplied with shower head and 2,5mt flexible hose. Made in shockproof ABS.

Flat water hose. The water comes out also when the hose is not completly unrolled. Reel lenght 15 mt. Not suitable for drinking water.

Collapsible water tank - Lt 20

Container for shower supplied with mixer tap and gaskets.

White Housing for lifebuoy Ø 65 cm

Terminal kit supplied with screws for pipe Ø 20-40mm. Made of nylon and can be applied on any type of Trem support. Centre to centre distance between holes for fastening of bridges or jumpers: 31mm.

Mobile phone and palmtop holder net in polyester. Frame in UV resistant ABS. Dimensions 126 x 98mm. White colour.

Red protest flag for racing. Made of spinnaker fabric for fastening on shrouds. Dimensions: 150x200mm. Red colour.

Universal model outboard motor and sterndrive flusher. Plastic coated frame with rubber suction cups and with connections.

Wide outboard motor flusher, a device for washing of outboards and sterndrives with fresh water. Universal model. L.28cm straight hose.

Big model outboard motor and sterndrive flusher. Plastic coated frame with rubber suction cups and with connections.

Plastic bottom board lifting ring. External size 57 mm. Hole D.44 mm. White colour.

Rubber mooring compensator with holes 210x35mm for line max Ø16mm.

Rubber mooring compensator with holes 260x40mm for line with max Ø18mm.

Rubber mooring compensator with holes 320x50 mm for line max Ø20mm.

Stainless steel bow guards. Model 1. Length 345mm. Width 265mm. Thickness 1,5mm. Weight 0.7kg.

Bowshield Manufactured in stainless steel. To be shaped by hand. Length 345mm, width 350mm, tickness 1,5mm. Weight 0,95kg.

Stainless steel bow guards. Model 3. Length 277mm. Width 320mm. Thickness 1,5mm. Weight 0.7kg.

Telescopic tiller outboard motor extension handle; telescoping model with pushbutton to easily switch off engine. In anodised aluminium with plastic joint. Anatomical grip. Adjustable from 60 to 100 cm.

Hand brush with handle with comfortable grip. This brush is ideal for cleaning propellers and wooden bridges as well as rails and steel parts.

Boat Scrubber abrasive sponge, essential for cleaning silt that forms on the antifouling after a few months in the water.

White container for anchors and winch handles 300mm, for anchors up to 2.5 kg.

Adjustable motor bracket manifactured in anodized aluminium. 5-position adjustment. 25HP

Central roller made of resistant rubber is ideal for moving a boat on a trailer. It also allows you to keep the boat in the center of a trailer. 76x80mm, Ø14mm hole.

Rubber central roller. Black colour. D.77 mm - L.100 mm - Hole 16 mm.

Rubber central roller. Black colour. Ø Hole 14mm. Length 130mm.

Pair launching wheels for Inflatable in shockproof plastic. Suitable for mounting on surfaces of wood, fibreglass or aluminium stern frames. 3 different locking positions. Easy to install.

Pair of davits for gangways and inflatable boats with 90° hinged arms with knob to block in a fixed position. Tube Ø40 mm. Height 70 cm. Max capacity 120 kg.

Anodized aluminum 2-arch bimini top 140/165cm Ø20mm with white UV-resistant resin polyester fabric, saline and hydrocarbons and nylon joints, height 110 cm, depth 180 cm.

Anodized aluminum 3-arch bimini top 160/180cm Ø20mm with white polyester resin fabric resistant to UV rays, saline and hydrocarbons and nylon joints, height 110 cm, depth 180 cm.

Anodized aluminum 3-arch bimini top 185/215cm Ø20mm with white polyester resin fabric resistant to UV rays, saline and hydrocarbons and nylon joints, height 110 cm, depth 180 cm.

Anodized aluminum 3-arch bimini top 160/180cm Ø20mm with white UV-resistant resin polyester fabric, saline and hydrocarbons and nylon joints, height 140 cm, depth 180 cm.

Anodized aluminum 3-arch bimini top 215/235cm Ø20mm with white UV-resistant resin polyester fabric, saline and hydrocarbons and nylon joints, height 140 cm, depth 180 cm.

Whie plastic joint with terminal. Diameter 20mm.

Bucket with stainless steel handle with loop. 9Lt. Blue colour. Made in thermoplastic material with handle with loop to attach a rope. Size: Ø.250xh.250mm.

Extractor Pump with plastic tank used to extract used engine oil by means of the built-in tank. Tank capacity 4,5 lt. Works by creating a vacuum with a manual plunger.

Extractor Pump with plastic tank for bailing oil/water. Package with connecting tubes. Capacity 6lt. Dimensions: Height 560mm, Ø230mm.

Bilge strainer in marine bronze for bilge pump, equipped with a stainless steel net. Dimensions 97x55xh22 mm. Hose connector Ø16 mm.

Round clmap to joint fender bracket to stanchion pipe. Made of stainless steel and nylon. For pipe with diameter 22/30 mm.

White PVC inflatable dock fenders, length 885 mm, width 270 cm, height 270 mm.

Sink centrifugal pump to be mount on tank base level, not self-priming. Discharge head 2 mt. Delivery capacity 6.6 l/min. Power supply 12V. Size 88x45 mm. Hose connector D.11 mm.

Fixed wooden boat hook with chrome-plated brass hook. Length 180 cm. D.30 mm.

Fixed wooden boat hook with chrome-plated brass hook. Length 210cm - D.30mm

Fixed wooden boat hook with chrome-plated brass hook. Length 240 cm. D.36 mm.

Telescopic aluminium oar with mooring hook. Made in anodised aluminium. Paddle in shockproof ABS. Length 120-200cm. Tubo 25mm.