-
1
White ASA shower head housing, UV-resistant with watertight cover. Flush mounting, cut-out Ø 70mm. White colour.
-
2
Round shower box. Recess Ø 56mm. White.
-
3
Drain plug. Manufactured in chromed brass with nylon cap. Safety lock included. Outer size 52x35mm. Hole spacing 38mm. Hole Ø 18mm. Recess Ø 23mm.
-
4
Drain plug. Manufactured in brass with rubber. Hole Ø 23mm.
-
5
Manual siphon pump for liquid transfer. Hose inner Ø 13mm. Ø " 1/2". Flow 18L/min. Hose length 1,75m. With this simple and ingenious tool you can easily decant all liquids from a container to another without dirtying.
-
6
TAMPA multipurpose sheet high tear resistance, very low stretch, handy, core: 16 plait in medium tenacity Polyester, cover: 16 plait in Polyester, high tenacity, 200m, Ø4mm, 380 daN, white colour.
-
7
Halogen pull-out pole light white colour. BS body. Lens in Polycarbonate. Aisi 316 pole. IPX6. Height60cm. 360° Pull-out. For boats <20.
-
8
Navigation light 225° with halogen deck light 10W. 12V. Fitting Masthead.
-
9
Long bow roller. Made of Aisi 316 stainless steel. Weight 0.72Kg. A= 230mm, B= 140mm, C= 83mm, D= 45mm, L= 40mm.
-
10
Small bow roller. Made of Aisi 316 stainless steel. Weight 0.43kg. A= 155mm, B= 101mm, C= 70mm, L= 50mm.
-
11
Halogen pull-out pole light, black colour. ABS body. Lens in Polycarbonate. Aisi 316 pole.
Supplied with halogen bulb. 12V 10W 1A.
-
12
PVC fabric for inflatable boat repair. Size 30x30 cm. Black colour. Thickness 0.9 mm.
-
13
Three-pole male plug 16A 230V made of UV-resistant polycarbonate, water resistance IP44, CEE plug, suitable for dock sockets, 125x53mm.
-
14
Female Power CEE plug 16A 230V made of UV-resistant polycarbonate, water resistance IP44, suitable for dock sockets, 130x50mm.
-
15
Hydrofoil Fin Outboard motor stabilising for any type of outboard and stern drive from 4HP to 50HP.
-
16
Hydrofoil Fin Outboard motor stabilising for any type of outboard and stern drive over 50HP.
-
17
PVC shower hose white. "Full white" model more elegant than the traditional net version. Length: 4 m. Terminal joints: 1/2" F + 1/2" F.
-
18
Plastic cup holder with suction cup bottom, anti-slip, non-slip, white colour, 1 piece.
-
19
H07V-K Flexible battery cable 2006/95/CE very thin copper strands for maximum flexibility, red sheath, 16mmq cable section, Ø8mm, sold by the metre.
-
20
H07V-K Flexible battery cable 2006/95/CE very thin copper strands for maximum flexibility, Black sheath, 16mmq cable section, Ø8mm, sold by the metre.
-
21
Stainless steel clamp rings Ø4 mm for shock cord fastening. 10pcs pack.
-
22
Stainless steel hook for shock cord. D.6 mm.
-
23
Stainless steel hook for shock cord. D.8mm.
-
24
Stainless steel hook for shock cord - D.10mm
-
25
Self locking hook for shock cord. D.5 mm. Pink colour.
-
26
Self locking hook for shock cord. D.6 mm. Purple.
-
27
Self locking hook for shock cord. D.8 mm. Red colour.
-
28
Table with 20 adhesive symbols, ideal to personalise switchboards. Dimensions 15x20mm.
-
29
World nations naval ensigns sticker. Dimensions 16x24cm
-
30
Die cast aluminium support for Ø 60mm table pedestal, flush mount. Base external diameter 165mm.
-
31
Die cast aluminium support for Ø 60mm table pedestal, external mount. Base external diameter 165mm.
-
32
Anodised aluminium tapered pipe for table pedestal. Length 70cm. Diameter 60mm.
-
33
Watertight sewing kit for sail repairs. Comes with leather palm guard, 5 original English needles, reel of waxed thread, roll of adhesive fabric for sail repairs. Container dimensioins 100x55mm.
-
34
Terminal block for electrical installations. 8 terminals. Base: 83 x150mm.
-
35
Stainless steel swivel joint in order to connect the chain to the anchor preventing twisting of the anchor chain, 90mm, 0,25kg.
-
36
Stainless steel fishing rod holder with multi position adjustment on handrails and pushpits. Suit for tube diameter 22-25-30mm.
-
37
PVC riggin screws cover - L380xD6-7mm
-
38
Pair of PVC rigging screw covers. Length 420 mm. D. 8-10 mm. Sold in pairs.
-
39
Pair of PVC rigging screw covers. Length 500 mm. D. 12-14 mm. Sold in pairs.
-
40
Outboard motor anti-theft device in stainless steel and provided with brass padlock. Tube diameter 30mm. Length 320 mm.
-
41
Outboard motor anti-theft device in stainless steel and provided with brass padlock. Tube diameter 30mm. Length 240mm.
-
42
POWER LIFT hoisting harness for outboard motors providing a safe and secure handle for carrying, hoisting and moving outboards. Universal for all types of outboard motors up to 15 Hp.
-
43
Polished stainless steel flagpole for pushpit or handrail mounting. Length 40 cm. Tube diameter 22/25mm.
-
44
Heavy nylon belaying cleat. Base 43x13 mm. Centre to centre distance D.4x27mm. Length 73mm. Black colour.
-
45
Rope/line holder. ideal for holding mooring and anchoring lines, halyards etc thus saving space. Also useful to hold nautical charts.
-
46
Nylon hook for inflatable boats. Designed to fasten canopies and covers on inflatable boats; can be used vertically or with continuous shock cord. For elastic cord with 6mm diameter. Grey.
-
47
Snap davit set for neoprene inflatable boats to be applied to the gangplank or directly to the stern platform of the boat.
-
48
Stainless Steel Swivel davit to lift outboard engine. Supplied with blocks, snap links, top booster, blocks and rail fastening. Ground fixing Base. Height 140 cm. Tube Ø50 mm. 50 kg.
