Polyurethane-resin-based two-component transparent varnish with excellent gloss retention. Bestowed with exceptional technical characteristics such as elasticity and mechanical strength, it can be used both on wood and on other surfaces that are appropriately prepared and under strict operating conditions. Thanks to its high abrasion resistance, it is recommended for application in highly stressed areas such as handrails and borders.
Application: brush, roller or spray.
TECHNICAL SPECIFICATIONS
Theoretical coverage: 9,0 m2L
Mixing ratio: 2:1
Recoating time: 6h - 2days (20°C)
Hard dry: 24h
Thinner: 6780 - 6700
SURFACE PREPARATION
New wood or renewed: the support must be perfectly dry, the humidity of the wood must not be over 18%. All the surfaces to paint must be cleaned, dry and free from any trace of contaminants. Sand down with P80-P120 sanding paper. Before proceeding with the application of the provided products, blow using dry and clean air, in order to remove every trace of sanding and dirt. Apply the first coat of VB-SHINE diluted 10 - 15%. Proceed with the following coats (3-5 coats) as well as explained.
Painted wood : sand down in order to eliminate every varnish trace during the stripping vessel phase; apply the first coat of VB-SHINE, diluted 5% than proceed with the following coats (2-
4 hands) as before.
N.B: Between the coats, use abrasive Scotch Brite fine (grey).
Pack 750 ml.