VB-Shine HP is a transparent two-component acrylic varnish, designed to meet durability needs in boat operating conditions. It protects the surface against ultraviolet rays, the elements and bestows an amazing appearance. Its high technical characteristics such as shine, spreadability and lack of yellowing, combined with the ease of application, allow it to be used on any type of boat. Its use is recommended where it is necessary to have a transparent finish with excellent properties. Its extremely clear appearance makes retouching work even easier by minimising the lens effect on blurred areas.
Application: brush, roller or spray.
TECHNICAL SPECIFICATIONS
Theoretical coverage: 10,0 m2L
Mixing ratio: 2:1
Recoating time: wet on wet 20 - 120min (20° C)
Hard dry: 48h
Thinner: 6780 - 6700
SURFACE PREPARATION
Apply on supports previously treated with products indicated in the "Recommended products" section. Apply on recommended primers, before proceeding with VB-SHINE HP application sand with P220-P320 paper blow with clean and dry air, to remove any residual sanding and dirt. If applied by spray give 2-3 coats wet on wet, if applied by brush give two coats diluted at 10 - 15%.
Pack 1.5 lt.