-
1
Seaflo 12V automatic pump low consumption with thermal protection against overloads, 3.8lt/min flow, 35PSI 2.4 bar pressure, it can feed 2 taps at the same time. Ideal for sprayers, cleaning machines, air humidifiers etc.
-
2
Self-priming diaphragm hand pump for boats and manholes 0.33l/pumped 180x125x75mm, Suitable for pumping bilge water, salt water or diesel transfer.
-
3
Shut-off full flow ball valve. Made-ready for bracket mounting, made of AISI 316 stainless steel. Thread D.1".
-
4
Europump II submersible bilge pump 1500 12V. Flow l/min - Max: 96. Flow l/min - with 2m head: 46. Current draw 8A. Max head 3.10m. Base Ø 120mm. Height 150mm. Hose adaptor Ø 29mm.
-
5
Europump II submersible bilge pump 1500 24V. Flow Max 96l/min. Flow with 2m head: 46 l/min. Current draw 5A. Max head 3.10m. Base Ø 120mm. Height 150mm. Hose adaptor Ø 29mm. R.I.N.a certification: DIP022608Y2.
-
6
Mirror polished stainless steel skin fittings with mirror polished ground connections, thread 1” 1/4, 77x65mm, Ø34mm.
-
7
Classic EVO deck shower for bulkhead mounting with Mizar push-button shower head. Lid finish Chromed. Recess Ø70x44mm. Outer dimensions Ø95mm. Hose: Net PVC 2,5m. Chromed brass shower head, white UV-resistant ASA housing.
-
8
Classic Evo deck shower with Mizar push-button shower head. Lid finish Chromed. Recess Ø70x44mm. Outer dimensions Ø95mm. Hose: Net PVC 2,5m. Chromed brass shower head, white UV-resistant ASA housing.
-
9
Thru-hull, water intake with strainer made of AISI 316 stainless steel, seawater resistant. Thread 3/4".
-
10
Nuvola deck shower with Keji shower head. Net PVC 2,5m hose. Recess bore 90x70mm. Outer dimensions 120x100mm.
-
11
A1 fuel hose smooth. Section 25x35,5mm. Internal Ø 25mm. External Ø 37mm. Approximate weight 0,87g/m. Bend radius 250mm. Made in compliance with EC standards, RINA ISO 7840/2013 type-tested under class A1.
-
12
Rubber hose 60x70mm with RINA + LLOYD approval for exhaust gas systems, temperature from -25 ° to + 120 ° C. Sold by the meter.
-
13
Replacement rubber impeller 09-824P-9 for Johnson F38B-19/F4B-19 12/24V self-priming pumps.
-
14
Freezer replacement thermostat for cooling units -12°C / -28°C 12/24V, probe length 2m, freezer version Vitrifrigo R10536.
-
15
Refrigerator replacement thermostat for cooling units + 15°C / -15°C 12/24V, probe length 2m, refrigerator version Vitrifrigo R10501.L.
-
16
Spare part for WHALE Gusher MK3 foot pump.
-
17
Universal Spare Kit for All Igloo Qt coolers.
-
18
SMEV Straight Drain outlet. Pipe Ø 25mm. Grating Ø 47mm. For sinks OS5080050; OS5080060; OS5080360; OS5080340.
-
19
Push button tap. Made of brass. Thread 3/8".
-
20
Rule livewell baitwell pump pump
-
21
Seaflo 12V 800 GPH Aeration Pump for Live Fish Tanks, 800 GPH Flow Rate, 12V (4A), 19mm Hose Diameter.
-
22
Screw kit for fixing the seat of the Jabsco manual toilet. For our code 37001404. Jabsco reference 29098-1000.
-
23
Classic EVO deck shower for bulkhead mounting with Mizar push-button shower head. Lid finish White. Recess Ø70x44mm. Outer dimensions Ø95mm. Hose: Net PVC 4m. Chromed brass shower head, white UV-resistant ASA housing.
-
24
Classic Evo deck shower with Mizar push-button shower head. Lid finish white. Recess Ø70x44mm. Outer dimensions Ø95mm. Hose: Net PVC 4m. Chromed brass shower head, white UV-resistant ASA housing.
-
25
Panel switch with audible alarm for bilge pumps. 12/24V. Size: 120x68,5mm. Model with rear cover.
-
26
Cockpit flush drain. Version: All thread. A= 80mm, B= 67mm, Ø C= 65mm, Ø D= 33mm, Ø E= 1" 1/4. Made of two chromed brass parts. Body and insert that works as a removable filter.
-
27
Straight on-off shower head with recessed container and 3 mt plastic hose. Hose has two female connections, one 1/2"C and one 3/8"F.
-
28
Aquanet filter. Technopolymer case with transparent screw cap. Stainless steel pull-out filtering unit. With snap support for easy removal.
-
29
Automatic electronic switch for bilge pumps. ON/OFF level 50/20mm. 12/24V. Max 20A. Size: 86x54x26h mm.
-
30
SeaFlo fresh water accumulator tank for autoclave pumps. Connections 1/2". Capacity 0.75 Lt. Pre-charged to 0.7 bar. Ø105 mm. Height 200 mm.
-
31
Linear distribution manifolds. 5 outlets. Section - main line 1". Section - derivation 1/2". 25cm. Made of brass, centre-to-centre distance of 50 mm.
-
32
UP500 12V 2.5A Submersible Bilge Pump 32l/min for bilge emptying with ABS material housing, corrosion resistant, size Ø59x94.5mm, lift 4m, Marco 160 100 12.
-
33
Stainless Steel thru hull skin fitting. Thread 1 inch with ground connections, thread 1”, 73x55mm, Ø25mm.
-
34
Side mount case with Shower head and hose complete with lid - 145x91mm
-
35
Brass 3-way ball valve, deviator. With total passage. L Operation type. Thread 3/4".
-
36
Europump II automatic bilge pump. G750 24V. Flow 48l/min. Current draw 1,6A. Head 3m. Hose adaptor (Ø A) 19mm.
-
37
Service kit for Italy manual toilet pump.
-
38
Swivelling spout taps made in chromed brass. Height 210mm. Cold water.
-
39
WHALE shower hose bag. Convenient plastic-mesh bag made for the hose of the below-deck shower to prevent getting entangled in the other equipment and making it impossible to extract the shower head.
-
40
Europump II automatic bilge pump. G1100 24V. Flow 70l/min. Current draw 2A. Head 3,2m. Hose adaptor (Ø A) 22mm.
-
41
Europump II submersible bilge pump 800 12V. Flow l/min - Max: 51. Flow l/min - with 2m head: 25. Current draw 5,5A. Max head 4.5m. Base Ø 88mm. Height 120mm. Hose adaptor Ø 19mm.
-
42
M5 fitting. Bulkhead type. 8+8-mm female fitting. DIN 8434-1.
-
43
Rubber hose 50.5x61mm with RINA + LLOYD approval for exhaust gas systems, temperature from -25 ° to + 120 ° C. Sold by the metre.Wa
-
44
Classic EVO deck shower for bulkhead mounting with Mizar push-button shower head. Lid finish White. Recess Ø70x44mm. Outer dimensions Ø95mm. Hose: Net PVC 2,5m. Chromed brass shower head, white UV-resistant ASA housing.
-
45
Classic Evo deck shower with Mizar push-button shower head. Lid finish white. Recess Ø70x44mm. Outer dimensions Ø95mm. Hose: Net PVC 2,5m. Chromed brass shower head, white UV-resistant ASA housing.
-
46
Europump II automatic bilge pump. G1100 12V. Flow 70l/min. Current draw 4A. Head 3,2m. Hose adaptor (Ø A) 22mm.
-
47
Gas cut-off valve with overpressure savety device. M16x1.5 thread + shell.
-
48
Plastic ball valve. Thread D.2" inches.
