-
1
Bilge pump switch panel for 12V pumps. Current draw 25A. Size: 75x60mm.
Universal for pumps with floating or electronic switch.
-
2
Switch panel to control bilge pumps. With switch for manual or automatic use of bilge pumps. Dimension 90x50 mm.
-
3
G tubes with 1/4" thread LH for G 1/4" LH tubes. Length 800mm.
-
4
Right tap. Height 210mm. Fitting 1x 3/8" Male.
-
5
Stainless steel ball valve - Thread D.3/4"
-
6
Chromed brass through deck fitting. Thread D.1-1/2" inches x45mm.
-
7
Scupper vent made of precision-cast mirror polished AISI 316 stainless steel. Thread 1/2". Thread length 65. Size: 38x38x18mm.
-
8
Chrome plated brass through deck fitting. Thread 1-1/4 inches. Pipe 38 mm.
-
9
Cast brass thru hull scoop strainer. 1-1/4 inch thread.
-
10
Cast brass thru hull scoop strainer. Thread 3/4".
-
11
PIPER PUMP vacuum self-emptying. Made of anodized aluminium; fitted with hose and stainless steel clamp for mounting the hose to the pump; universal size for all outboard engines.
-
12
Europump 4 Low Consumption Fresh Water Pump 12V 2A Ø10mm, 170x100x60mm, capacity 3l/m and 2.45 bar.
-
13
Cased eco-friendly automatic switch for any bilge pump. Max 15A. Size: 152x85x84h mm.
-
14
Connection to M5 fittings or with shut-off valve OS5001314 + female fitting on kitchen hose adapter (8-mm smooth hose adapter).
-
15
1/4" threaded tubes (connection for code OS5001312) + 8mm smooth tube (connection to shut-off valve code OS5001314). Length 1000mm.
-
16
Plastic and chromed brass lever-operated shower head, with chromed brass deck support, PVC hose 4 meters.
-
17
Europump centrifugal pump for livewell tank aeration. Submersible version. 12V. Flow 38 l/min. Consumption 3A. Drain Ø 19mm. ABS body, stainless steel shaft, permanent magnet motor. Easy to disassemble and clean.
-
18
Chromed brass drain outlet. Length 75mm, fitted with push-pull closing system and with thread size 1" 1/4; it is also used to mount the sink onto a support base.
-
19
Submersible pump - 8Lt/min.
-
20
Bag for shower hose. Convenient plastic-mesh bag made for the hose of the below-deck shower to prevent getting entangled in the other equipment and making it impossible to extract the shower head. Easy to fasten and adapt to all situations.
-
21
Rubber hose 30x39mm with RINA + LLOYD approval for exhaust gas systems, temperature from -25 ° to + 120 ° C. Sold by the meter.
-
22
Convenient plastic-mesh bag made for the hose of the below-deck shower to prevent getting entangled in the other equipment and making it impossible to extract the shower head. Mounting: To be screwed.
-
23
M5 fitting. T type. 8+8-mm female fitting. DIN 8434-1.
-
24
300GPH 12V Europump bilge pump. Max flow 19l/min. Current draw 2A. Head 1,5m. Inlet Ø 19mm. Ø 66x97 h mm.
-
25
Chrome plated brass through deck fitting. Thread 1 inch. Pipe 30mm.
-
26
Stainless steel suction strainer 57x58xH21mm. Hose connector D.16/18mm.
-
27
Sink centrifugal pump to be mount on tank base level, not self-priming. Discharge head 2 mt. Delivery capacity 6.6 l/min. Power supply 12V. Size 88x45 mm. Hose connector D.11 mm.
-
28
90° stainless steel fuel vent. Head Ø 66mm. Hose adaptor Ø 16mm. Mounting hole 40mm. Mounting with 3 screws.
-
29
Housing for shower head and mixer + plain lid. Oval version. Shower outlet: Rear. Material: UV-resistant ASA. Finish white. Recess 150x80x40mm. Outer dimensions 185x131mm.
-
30
G tubes with 1/4" thread LH for RVS 8 tube. Length 600mm
-
31
G tubes with 1/4" thread LH for G 1/4" LH tubes. Length 600mm.
-
32
Stainless steel vent complete with ffire-proof screen and hose adaptor for Ø16 mm tube, straight variant.
-
33
Yellow plated brass through deck fitting. Thread Ø1-1/4 inches. Pipe Ø38 mm.
-
34
Object holder/container with Hatch. External dimensions 230 x 150mm. Internal dimensions 180 x 105mm. White colour.
-
35
Connection to M5 fittings or with shut-off valve OS5001314 + female fitting on kitchen hose adapter (8-mm smooth hose adapter).
-
36
1/4" threaded tubes (connection for code OS5001312) + 8mm smooth tube (connection to shut-off valve code OS5001314). Length 800mm.
-
37
In liner filter with nylon filter element. It avoids blocks or damage to the pumps. Hose connector D.12 mm.
-
38
Made of clear PVC, fitted with steel spiral; very soft, no crushing, curves equal to the outer diameter; ideal for sea cocks.
-
39
Brass check valve made of brass, designed for mounting along pipework, prevents the backflow of fluids. Thread 1" 1/2.
-
40
Sea cock yellow brass with rounded head. Thread Ø1-1/4 inches.
-
41
Heavy brass washer drain. 1-1/4 inches thread.
-
42
Linear distribution manifolds. 3 outlets. Section - main line 1". Section - derivation 1/2". 15cm. Made of brass, centre-to-centre distance of 50 mm.
-
43
Waste container fitted with snap-in locking. Uses standard waste bags, the automatic locking system prevents bad odours leakages.
-
44
Universal accumulator tank for fresh water pumps. Volum 1 liter. Max pressure 6 Atm. 1/2" female Hose adaptor.
-
45
Bowl water inlet kit for manual or electric toilet bowl.
-
46
3-way brass joint. Thread 3/4".
-
47
Automatic Switch for Bilge Pumps 20A/12V 10A/24V - Activation 51mm Deactivation 19mm
-
48
Universal adapter with hose adapter Ø 31/39/45/50/58 mm.
