-
1
AS3 automatic float switch for bilge pump 12-24V, maximum electric input 14A, 127x42x110mm, cable section 90cm, 19-51mm Off-On. Marco 161 002 20.
-
2
Whale Orca bilge pump 500 GPH 12V. Current draw 1,5A. Hose adaptor 3/4" (19 mm). Max head 3m. Size: 83x102x78,5mm.
-
3
Cockpit drain. D - Inside thread 1". A= 58mm, BXC 50x38mm, E= 5,3mm. Made of mirror-polished AISI316 stainless steel. Snap upper grid for mounting and hiding the fastening screws.
-
4
Cockpit drain. Fixing hole 32mm. Hose adaptor 20mm. Deck thickness 3/11mm. Head Ø 42mm. Made of AISI316 stainless steel. The upper part is screwed thus allowing mounting on different gauges.
-
5
Clamping Ring Kit for Whale Compact 50 Pump. Closing ring and screws.
-
6
Utility water filter - 150Lt/min
-
7
Master 750 GPH Automatic Bilge Pump 12V, flow rate 47 l/min, 145x83xh103mm, absorption 3Ah, outlet Ø19 mm.
-
8
Complete tap, ready for installation.
-
9
Spare Surelock Hinge for All Igloo Qt
-
10
Seawater strainer in polycarbonate for pumps and engine cooling. L125xh115mm Pots Ø19(3/4")mm
-
11
Seawater strainer in polycarbonate for pumps and engine cooling. L125xh115mm Pots Ø16(5/8")mm
-
12
Cast brass thru hull scoop strainer. 1-1/2 inch thread.
-
13
Europump II automatic bilge pump.Very compact, with integrated electronic level sensor. ABS body, stainless steel shaft. Reduced electricity consumption. 12V. Type G750. Flow 48 l/min. Head 3m. Consumption 3A. hose connector 19mm.
-
14
Master 600 GPH Automatic Bilge Pump 12V, flow rate 38 l/min, 145x83xh103mm, absorption 2.5Ah, outlet Ø19 mm.
-
15
Double acting hand pump, designed to suction oil. Length 39cm. Fitted with nylon hose for fitting onto oil sidepiece and drainage pipe; also suitable for draining needy bilges.
-
16
Europump II submersible bilge pump 1000 24V. Flow l/min - Max: 64. Flow l/min - with 2m head: 30. Current draw 3,5A. Max head 4.5m. Base Ø 88mm. Height 120mm. Hose adaptor Ø 29mm.
-
17
Europump II submersible bilge pump 1000 12V. Flow l/min - Max: 64. Flow l/min - with 2m head: 30. Current draw 5,5A. Max head 4.5m. Base Ø 88mm. Height 120mm. Hose adaptor Ø 29mm.
-
18
Hold Down Kit for Porta Potti Qube 365 portable toilet.
-
19
Europump 90° bulkhead pump fish tank aeration. 12V. Flow 38 l/min. Consumption 3A. Drain Ø 19mm.
ABS body, stainless steel shaft, permanent magnet motor. Easy to disassemble and clean.
-
20
Chromed brass expansion drain plug 42mm for brass bushings.
-
21
Side mount case with Shower head, 3m hose complete anche lid, 145x91x80mm
-
22
Europump II automatic bilge pump. G600 12V. Flow 38l/min. Current draw 2,5A. Head 2,5m. Hose adaptor (Ø A) 19mm.
-
23
Accumulator tank. Volum 0,75l. Max pressure 8,6 bar. Fittings 1/2". Hose adaptors included 2 to 13 mm. Made of ABS.
-
24
Universal fuel tank base - 485x340 mm
-
25
Scupper vent made of precision-cast mirror polished AISI 316 stainless steel. Thread 3/4". Thread length 65. Size: 44x44x20mm.
-
26
Full Flush chromed-brass fuel vent. 90° model. Hose adaptor Ø 16mm. The vent is located in the lower part for a completely closed design.
-
27
Brass ball valve - Thread D.1-1/4"
-
28
Ball ball brass 3-way, deviator. Thread 3/8". Operation type L. With total passage. Nickel-plated brass diverting valve. Red coated steel lever control. Operating temperature from -10° to +100°.
-
29
Boris black hand shower with plastic shower head with chromed head, UV-resistant ASA housing. Recess: Ø70x40.5 mm. Net PVC hose 4 meters.
-
30
Linear distribution manifolds. 4 outlets. Section - main line 1". Section - derivation 1/2". 25cm. Made of brass, centre-to-centre distance of 50 mm.
-
31
Rubber hose 40x50mm with RINA + LLOYD approval for exhaust gas systems, temperature from -25 ° to + 120 ° C. Sold by the meter.
-
32
Europump in-line bulkhead pump fish tank aeration. 12V. Flow 38 l/min. Consumption 3A. Drain Ø 19mm.
ABS body, stainless steel shaft, permanent magnet motor. Easy to disassemble and clean.
-
33
Toilet anti-siphon with vent valve. Hose connection diameter from 13 to 38 mm.
-
34
Mirror polished stainless steel skin fittings with mirror polished ground connections, thread 3/4'', 68x49mm, Ø19mm.
-
35
RM5500 single right tap in chromed brass with collapsible and triangular spout in chromed ABS. Neck height 170 mm. Thread D.3/8". Reference 03.47.35000
-
36
G tubes with 1/4" thread LH for G 1/4" LH tubes. Length 1000mm.
-
37
Elephant bilge pump. Model 750. 12V. Flow 50l/min. Current draw 2,7A. Hose adaptor: 19 straight and 90°. Size: 79x130x116mm.
-
38
Heavy yellow brass washer. Thread Ø1-1/2 inches.
-
39
Heavy brass washer drain. 1-1/2 inches thread.
-
40
Yellow plated brass through deck fitting. Thread Ø1-1/2 inches. Pipe Ø45 mm.
-
41
Manual bilge pump. Simple control of the liquid to be bailed. Supplied with terminal extension and spiral drainage hose. Length 100 cm.
-
42
Stainless Steel Tiger spare shower head Lever-operated.
-
43
Nautiline manual pump. Suitable for any type of boat. Capacity 45Lt/min Ø35mm, 180x120x75mm, 0.57kg.
-
44
Mirror polished stainless steel fuel vent. Degree angle 90°. For pipe Ø 16mm. Fitted with fire-proof screen and hose adaptor. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
45
AIRFLEX/std pvc hose suitable for air, fume, gas, for conditioning and ventilation.Tubo autoestinguente secondo le UL 94 VO. Temperaure range:-10°C° + 60°C°.
-
46
Rubber hose 35x44mm with RINA + LLOYD approval for exhaust gas systems, temperature from -25 ° to + 120 ° C. Sold by the meter.
-
47
Large capacity oil change manual pump with ports and tubing.
Reinforced Plastic body. Lenght 390mm.
-
48
Oil change pump. Made of brass with removable tubing for easy operation. 80cc capacity for every pumping. Designed to fit engine dipstick tube. Lenght 23 cm.
