-
1
Lofrans Vertical Windlass X2 in anodised marine aluminium anodizzato. Gypsy for 8 mm chain. Gypsy for 14 mm ropes. Line speed at W.L. 20m/min. Maximum pull: 1000 kg. Motor 1000W.
-
2
Lofrans Dorado Horizontal Windlass. Gypsy for 6 mm chain. Gypsy for 10-12 mm ropes. Recovery speed at load 18m/min. Maximum pull force: 600 kg. Motor 500W.
-
3
Lofrans Dorado Horizontal Windlass. Gypsy for 6 mm chain. Gypsy for 10-12 mm ropes. Line speed at W.L. 20m/min. Maximum pull force: 650 kg. Motor 700W.
-
4
Lofrans Kobra Horizontal Windlass. Gypsy for 6 mm chain. Line speed at W.L. 16m/min. Maximum pull force: 1250 kg. Motor 1000W. 12V. With drum.
-
5
Lofrans Capstan T500 Windlass. Line speed at W.L. 26m/min. Maximum pull force: 630 kg. Motor 500W. 12V.
-
6
This device is a switch which works simply by pushing the foot on the button. Stainless Steel base. Down version. 12-24V. Size: 80x95x20mm.
-
7
This device is a switch which works simply by pushing the foot on the button. Stainless Steel base. UP version. 12-24V. Size: 80x95x20mm.
-
8
THETIS 1002 Lofrans 12-24V HH Remote control with 2 buttons (Up & Down) and spiral cable approximately 4 meters long, 154x59x38mm.
-
9
This remote chain counter model THETIS 5003 has been specifically designed to give full control in anchoring. 3 button. 12-24V, 154x59x38mm, 710gr.
-
10
This fly bridge chain counter IRIS is technologically advanced instrument with an elegant and ergonomic design makes it suitable for all type of boat cockpits. 12-24V. 3 button.
-
11
Lofrans 12-24V Radio Remote Control. 12-24V. Supports up to 8 independently controlled channels. Zero power consumption when in standby mode.
-
12
This switch, usually installed on the cockpit, is made by a fixing plaque and by a three position switch (Up-Off-Down).
-
13
Marks the exact position of the anchor. Comes with flashing LED light, with light sensor that switches on in the darkness. Buoy with reflective tape to help with mooring manoeuvres in the dark.
-
14
Two-cone anchor buoy - 6 Lt - D.220xH540mm - Orange colour
-
15
White colourWhite/Orange or Yellow colour
-
16
Two-cone anchor buoy - 6 Lt - D.220xH540mm - Yellow colour
-
17
Two-cone anchor buoy - 11 Lt - D.280xH640mm - Orange colour
-
18
Two-cone anchor buoy - 11 Lt - D.280xH640mm - White colour
-
19
Two-cone anchor buoy - 11 Lt - D.280xH640mm - Yellow colour
-
20
Two-cone anchor buoy - 26 Lt - D.320xH750mm - Orange Colour
-
21
Two-cone anchor buoy made of UV-resistant PE in bi-conical shape, 25kg buoyancy, Ø320xh750mm, white colour.
-
22
Two-cone anchor buoy - 26 Lt - D.320xH750mm - Yellow colour
-
23
Two-cone anchor buoy - 64 Lt - D.520xH1070mm - yellow colour
-
24
UV resistant, supplied with zinc plated steel terminal hooks and intermediate ratchet, in order to stretch the strap as required. LengthLunghezza 4mt.
-
25
UV resistant, supplied with zinc plated steel terminal hooks and intermediate ratchet, in order to stretch the strap as required. Length 6mt.
-
26
Rubber mooring compensator with holes 210x35mm for line max Ø16mm.
-
27
Rubber mooring compensator with holes 260x40mm for line with max Ø18mm.
-
28
Rubber mooring compensator with holes 320x50 mm for line max Ø20mm.
-
29
Stainless steel bow guards. Model 1. Length 345mm. Width 265mm. Thickness 1,5mm. Weight 0.7kg.
-
30
Bowshield Manufactured in stainless steel. To be shaped by hand. Length 345mm, width 350mm, tickness 1,5mm. Weight 0,95kg.
-
31
Stainless steel bow guards. Model 3. Length 277mm. Width 320mm. Thickness 1,5mm. Weight 0.7kg.
-
32
White container for anchors and winch handles 300mm, for anchors up to 2.5 kg.
-
33
Round clmap to joint fender bracket to stanchion pipe. Made of stainless steel and nylon. For pipe with diameter 22/30 mm.
-
34
White PVC inflatable dock fenders, length 885 mm, width 270 cm, height 270 mm.
-
35
White polyester braided rope for various uses. Diameter 2 mm. Length 50 mt.
-
36
White polyester braided rope for various uses. Diameter 3 mm. Length 50 mt.
-
37
White polyester braided rope for various uses. Diameter 4 mm. Length 40 mt.
-
38
White polyester braided rope for various uses. Diameter 5 mm. Length 30 mt.
-
39
Stainless steel and plastic removable pair hooks for fender holders. Need to be fixed with 2 screws for each hook (screws not included), 40mm base, 2 pcs.
-
40
Stainless steel swivel. Eye-shackle. 12mm pin. Thickness 12mm. Length 150mm.
-
41
Anodized light alloy symmetrical fairlead 210x38mm
-
42
Anodized light alloy symmetrical fairlead, dimensions 165x33 mm, centre-to-centre distance Ø6x140 mm
-
43
Anodized light alloy symmetrical fairlead 140x28mm
-
44
Float with through hole. Diameter 170 mm. Height 145 mm. Hole diameter 15 mm. White colour.
-
45
Hole-buoy. Diameter 170 mm. Heigth 145 mm. Hole diameter 15 mm. Yellow.
-
46
Float with through hole. Diameter 170 mm. Height 145 mm. Hole diameter 15 mm. White colour.
-
47
Float with through hole. Diameter 260 mm. Height 200 mm. Hole diameter 30 mm. White colour.
-
48
Float with through hole. Diameter 260 mm. Height 200 mm. Hole diameter 30 mm. Yellow colour.
