Motomarine Trieste Accessori Nautici Catalogo

Polyester padded with inner layer PVC ring buoy bags, endowed with adjustable fixing belts and zip. Can contain a 600 mm ring buoy with floating lifebuoy and rescue line. Ø 680mm. White.

Round Board Blue Mat. Rubber and Polyamide non-slip UV resistant. Size: 70x50cm.

Recessed long Plastic air vent. Size: 460x87mm. Recess size: 405x57mm. Black.

Mirror Polished Stainless Steel air vent with big air inlet and bracket for ø 75 mm air duct hose. Size: 150x120mm.

ABS Panel with 6x10A waterproof switches, 6 fuse holders and 6 LED indicators complete with preprinted labels. Dimension 110xh125 mm. Color black.

Finishing Joint for ECO1 PVC fender profile height 25mm. Colour black.

This is the only PVC fender profile easy and quick to install that can be cold fitted in a few quick steps. Its flexibility and handling make the profile unique. black colour.

ECO1 Fender Profile 30xh25mm, pack of 12 metres, colour black, suitable for finishing joint edges between deck and hull.

Microfiber special wash glove perfect for any surface quick cleaning. One side absorbs water and detergents for a perfect soaping and rinsing. The other side removes dirt and descales. Size: 260x200mm.

Superior quality super absorbing synthetic chamois leather ideal for cleaning, drying and polishing all surfaces even chromed and painted. 10 times longer life than normal chamois leathers. Size: 43x66 cm.

PVC Black Finishing Joint for Fender Profile height 45mm.

End Cap for ECO1 PVC Fender profile. Colour black. For fender profile height 25mm.

ECO1 Fender Profile 30xh25mm, pack of 16 metres, colour black, suitable for finishing joint edges between deck and hull.

ECO1 Fender Profile 30xh25mm, pack of 24 metres, colour black, suitable for finishing joint edges between deck and hull.

U PVC fendering profile to protect the flat sides of the boat. U2 fixing strip support is needed for mounting. Black colour. Height 40mm. Length 16m.

U PVC fendering profile to protect the flat sides of the boat. U2 fixing strip support is needed for mounting. Black colour. Height 40mm. Length 24m.

Hexagonal ogive anode for Vetus KGF 220 bow thruster. Original reference BP1210.

40A Thermal cut-out switch for protection of the main windlass circuit. Enables the battery to be isolated when the winch is not in use.

Stainless Steel transom swim platforms with marine wood planks and folding ladder. Size: 390x450mm. 3 steps.

Denmark Flag, 100% polyester bunting. Size: 50x75cm.

Wind rose Ice Relief self-adhesive sticker. Ø 80mm.

Star Brite Star-Prene fiber brushes with synthetic wood handle and bumper protection. Yellow - soft type: holds water and it is perfect for washing windows and Fiberglass surfaces.

Anodized aluminium telescopic Handle 100<>180 cm.

Yellow Brush- soft bristle: perfect for washing windows and sides. Polypropylene brushe with protection rubber edge.

Blue Brush - medium bristle: perfect for all around cleaning. Polypropylene brushe with protection rubber edge.

White Brush - hard bristle: perfect for deck washing, rough and particularly dirt surfaces. Polypropylene brushe with protection rubber edge.

Cleaning brush kit complete with telescopic Aluminum handle, brush, mop and boathook. Packaged in a clear blister.

VET 1 Plate hull anode for fairings. Size: 150x60xh25 mm. Center distance 80 mm.

Manual oil change Brass pump for any outboard or sterndrive with 16 (3/8") drain screw. Perfect for use with 946 ml oil bottles, complete with Yamaha adaptor. Length 150mm.

Stainless Steel fold-away under platform boarding ladders with wide steps for a comfortable climb back up. Complete with cage and guide rails. Size: Height 87,5cm, width 25cm, length 37cm.

ECO2 Fender Profile 30xh25mm, 550gr/m, 12 metres pack, black colour, suitable for finishing joint edges between deck and hull.

ECO2 Fender Profile 30xh25mm, 550gr/m, 16 metres pack, black colour, suitable for finishing joint edges between deck and hull.

ECO2 Fender Profile 30xh25mm, 550gr/m, 24 metres pack, black colour, suitable for finishing joint edges between deck and hull.

Navigation lights and light signals sticker chart. Italian language. Size: 160x240mm.

SF-G800 SeaFlo live well aerating pump. Easily removable for cleaning. Dip Tube: Straight. Capacity 50L/min. Port ø 19mm. 12V.

White vinyl covered 19-strand Stainless steel wire rope. External Ø 6mm. Wire Ø 3mm. Reel of 30 meters.

White vinyl covered 19-strand Stainless steel wire rope. External Ø 8mm. Wire Ø 4mm. Reel of 30 meters.

Toilet brush for wall or floor mounting with adhesive or screws, designed for the needs of marine toilets, campers, 250x80mm.

Reinforced Plastic pear-shaped mooring buoy. Diameter 250mm. Height 390mm. Buoyancy 10kg. Orange colour.

Flush mount Techimpex 220V hobs with vitreous ceramic radiant plates, touch control sensors and Stainless Steel case, Linosa 1200+1700W plates power, size 500x300mm, 5kg.

Pot holder for Techimpex built-in hob 220V Linosa 1200 + 1700W with vitreous ceramic radiant plates, touch control and stainless steel case (our code MT1505860).

316 Stainless Steel bolt snap hook with swivel eye. Piston pin opening. Lenght 80mm. Eye 13mm.

Washing Kit tank S with built-in electric pump. 12V. Capacity 2.5lt. Dimensions: 125x145xH215 mm.

Stainless Steel swiveling eye snap. Length 68 mm. Eye 13mm.

Stainless Steel pivoting bow roller. Max Anchor 15Kg. For Bruce - Delta - CQR – Rocna - Spade anchors. Length 300mm. Width 125mm.

Anodized Aluminum shaft and Plastic blade telescopic paddle with boathook. Diameter 30mm. Length 120-165cm.

Galvanised Steel Toro 63kg Anchor. Length 1270mm. Width 567mm. For motor boats <25 m, sailing boats <25 m. Quick penetrating anchor. For sandy - muddy seabeds.

BAY15D waterproof double contact LED bulb with non parallel pins. 12/24V power supply. Power 3W. 280 lumens. Height 70 mm. The IP67 degree of protection.