-
1
NGK sparkplug. LFR6A-11.
-
2
Stainless steel roll connector with double joint for anchor and chain. It is impossible for the chain to get twisted. 6/8 mm chain. Total lenght: 117 mm.
-
3
TrimFix Stainless Steel long swivel connector for Ø6/8 mm chains. It runs in the bow anchor without stalling, prevents chain tangling.
-
4
Low profile cowl air vent, made of white flexible PVC, with base and cap. Low profile. Neck D.100 mm. High 150 mm. Base D.140 mm. Width 185 mm.
-
5
U-bolt clamps AISI 316 For cable size 3/4mm Thread M4
-
6
Nylon and plexiglass Opening porthole with lock nuts and trim ring. Screws included. Overall size 400x200 mm. Glass opening 320x120 mm. White colour.
-
7
Opening Porthole 500x250mm White colour
-
8
Opening Porthole 400x200mm Black
-
9
Nylon and plexiglass opening porthole with lock nuts and trim ring. Overall size 500x250 mm. Glass opening 440x190mm. Black colour.
-
10
Round Nylon frame and acrylic glass opening porthole with lock nuts and trim ring. Overall size D.220 mm. Glass opening D.135 mm. Cutout 160mm. White.
-
11
Round Nylon frame and acrylic glass opening porthole with lock nuts and trim ring. Overall size D.270 mm. Glass opening D.185 mm. Cutout 210mm. White.
-
12
Round Nylon frame and acrylic glass opening porthole with lock nuts and trim ring. Overall size D.320 mm. Glass opening D.235 mm. Cutout 260mm. White.
-
13
Round Nylon and plexiglass opening porthole with lock nuts and trim ring. Overall size D.220 mm. Glass opening D.135 mm. Cutout 160mm. Black.
-
14
Round Nylon and plexiglass opening porthole with lock nuts and trim ring. Overall size D.270 mm. Glass opening D.185 mm. Cutout 210mm. Black.
-
15
Round Nylon and plexiglass opening porthole with lock nuts and trim ring. Overall size D.320 mm. Glass opening D.235 mm. Cutout 260mm. Black.
-
16
Floating banana keyring with soft plastic material. Assorted colors.
-
17
Compact mixer with T control lever and 3/8" shower head flexible connections, ready for installation. Diameter 32 mm.
-
18
Stainless steel T joint. Tube D.25 mm.
-
19
Stainless steel T joint. Tube Ø22 mm.
-
20
Stainless steel half-moon plate for ladders and transom. Tube Ø22 mm.
-
21
Stainless Steel U joint. Tube D.22 mm.
-
22
Stainless steel replacement joint for folding ladders. Tube Ø22 mm.
-
23
Stainless steel replacement joint for folding ladders. Tube Ø25 mm.
-
24
Stainless Steel U joint - Tube D.25mm
-
25
Adjustable polyethylene sitting box 60 to 80 cm for tender and inflatable boats.
-
26
Emergency wood pins. Absolutely necessary in case of small leaks. Just put the ideal size wood pin in the hole with a hammer. Set of 10 pieces, assorted sizes.
-
27
Stainless steel AISI 316 deckfill with key. Water. D.38mm.
-
28
Stainless steel AISI 316 deckfill with key. Fuel. D.50mm.
-
29
Stainless steel clamp for 8 mm wire rope.
-
30
Stainless steel thimble eye for 10 mm rope.
-
31
Stainless steel thimble eye for 18 mm rope.
-
32
Stainless steel thimble for 20 mm rope.
-
33
Stainless steel half-moon plate for ladders and transom. Tube Ø25 mm.
-
34
Flat anvil shaped Anodised Aluminium cleat. Hollow base with 4 mounting holes. Length 150mm. Centre distance 33mm.
-
35
Flat anvil shaped Anodised Aluminium cleat. Hollow base with 4 mounting holes. Length 200mm. Centre distance 51mm.
-
36
Flat anvil shaped Anodised Aluminium cleat. Hollow base with 4 mounting holes. Length 250mm. Centre distance 67mm.
-
37
Outstanding quality and finish flat anvil shaped HS Anodised Aluminium cleat.
Hollow base with 4 mounting holes. Length 125mm. Centre distance 39mm.
-
38
Outstanding quality and finish flat anvil shaped HS Anodised Aluminium cleat.
Hollow base with 4 mounting holes. Length 160mm. Centre distance 44mm.
-
39
Outstanding quality and finish flat anvil shaped HS Anodised Aluminium cleat.
Hollow base with 4 mounting holes. Length 210mm. Centre distance 59mm.
-
40
Outstanding quality and finish flat anvil shaped HS Anodised Aluminium cleat.
Hollow base with 4 mounting holes. Length 260mm. Centre distance 70mm.
-
41
Low profile anvil shaped anodised aluminium flat cleat. Narrow base with 2 through mounting holes. It can be mounted in tight spaces. Length 160mm. Wheelbase 37mm.
-
42
Low profile anvil shaped anodised aluminium flat cleat. Narrow base with 2 through mounting holes. It can be mounted in tight spaces. Length 220mm. Wheelbase 43mm.
-
43
Compact and elegant flat anvil shaped HS Anodised Aluminium cleat. Length 80mm. Narrow base with 2 thru fixing holes. Centre distance 20mm.
-
44
Compact and elegant flat anvil shaped HS Anodised Aluminium cleat. Length 100mm. Narrow base with 2 thru fixing holes. Centre distance 26mm.
-
45
Compact and elegant flat anvil shaped HS Anodised Aluminium cleat. Length 125mm. Narrow base with 2 thru fixing holes. Centre distance 32mm.
-
46
Compact and elegant flat anvil shaped HS Anodised Aluminium cleat. Length 150mm. Narrow base with 2 thru fixing holes. Centre distance 38mm.
-
47
Compact and elegant flat anvil shaped HS Anodised Aluminium cleat. Length 200mm. Narrow base with 2 thru fixing holes. Centre distance 52mm.
-
48
Compact and elegant flat anvil shaped HS Anodised Aluminium cleat. Length 250mm. Narrow base with 2 thru fixing holes. Centre distance 60mm.
