Motomarine Trieste Accessori Nautici Catalogo

Johnson 09-1077B-B9 Nitrile replacement impeller, Ø35,2/8mm h12,7mm.

Water repellent UV rays resistant acrylic fabric Navishell turnbuckle cover, grey color, 37cm length.

Original german Tenax chromed brass button. Female

Original German Loxx - Tenax high quality stainless steel self-tapping coach screw. Please note: the original Tenax (Made in Germany) becomes Loxx. Self-tapping screw 12mm.

Male snap with screw and nut. Length A: 10 mm. Fitted with press-functioning system and spring lock on the female.

Original german Tenax chromed brass button. Plate male.

Original german Tenax chromed brass button. Male for textile.

Original German keys for Loxx buttons - Tenax. Professional wrench with floating handle.

Stainless steel foldable step. Base 45x110 mm. Step 50x85 mm. Folded overhang 21 mm.

Black signal cone in anti-reflective black polycarbonate to be hoisted during day light. Hight 470 mm. Indicates use of the motor on a sailboat.

Black signal ball regulate Ø 350 mm. Made of antiglare black polycarbonate, to be hoisted during day light when the boat is anchored; if there is no steering 2 balls shall be mounted vertically.

Marine 2001 Inclinometer double-bubble. Clinometer with scale: 45°-0°-45°. Magnified Scale: 5°-0°-5°. Dimension 82x100 mm.

Column pot stand, two clips, suitable for stoves and cooking hobs, suitable for codes: MT1506622, MT1504550, MT1506602, MT1506612, MT1504652, MT1504050.

Stainless steel buoy holding bracket suitable for lifebuoys or horseshoe buoys. Wall and rail Ø22<>25mm mounting bracket.

Johnson fresh water accumulator tank for autoclave pumps in varnished steel. Connections 3/4". Capacity 2 Lt. Pre-pressurized at 0.8 bar. Ø160 mm. Height 315 mm.

SeaFlo fresh water accumulator tank for autoclave pumps. Connections 1/2". Capacity 0.75 Lt. Pre-charged to 0.7 bar. Ø105 mm. Height 200 mm.

Stainless steel flagpole holder to be fixed on the boat stern. For flagpole with diameter 22-25 mm.

Seawater strainer in polycarbonate for pumps and engine cooling. L165xh165mm Pots Ø25(1")mm

Covers for battery terminals made of rubber.

Porthole gasket. Sold by the metre.

Connectors for profile Dock Edge DD Type 12.2m made of marine grade UV and salt resistant PVC. White color.

Corners for profile Dock Edge DD Type 12,2m constructed of marine grade UV and salt resistant PVC. White colour.

End Caps for profile Dock Edge DD Type 12,2m made of marine grade UV and salt resistant PVC. White colour.

Protection profile for docks, pontoons and for any protection application. Made of marine grade UV and salt resistant PVC. White colour. Length 12.2 metres.

Connectors for profile Dock Edge P Type 9.80m made of marine grade UV and salt resistant PVC. White colour.

Pair of Corners for profile Dock Edge P Type 9.80m made of marine grade UV and salt resistant PVC. White color.

Pair of end caps for profile Dock Edge P Type 9.80m made of marine grade UV and salt resistant PVC. White colour.

Edge protection profile for docks, pontoons and for any protection application. In marine grade UV and salt resistant PVC. White colour. Length 9.8 metres.

Guard Dock Edge Protection Profile 3m for docks and piers, in marine grade UV and salt resistant PVC, height 7.3 cm, thickness 1.9 cm, white colour.

3 metre long fender profiles for docks, pontoons and general purpose protection, made of high impact resistance PVC with a very low friction coefficient, height 60 mm, black colour.

3 metre long fender profiles for docks, pontoons and general purpose protection, made of high impact resistance PVC with a very low friction coefficient, height 90 mm, black colour.

PVM1 White polyurethane Bow & Stern Guard for sailing boats and catamarans, dimensions 60x25xh17cm.

Bow guard protection fender for sailboats when weighing anchor or when bow berthing occurs. Sturdy PVC body for maximum shock absorbtion (it does not deflate, does not contain air). Four fixing eyes for a secure hold.

Fender designed for sailing boats transom protection. Perfectly matches any stern type from 60° to 75°.

Fender designed for sailing boat transom protection. Perfectly matches any stern type from 75° to 90°.

PVC Flex Dock Edge Protection Bumper for docks, pontoons, as well as masts and rounded surfaces, resistant to salt, UV rays and fungi, length 1.80 m, height 15.2 cm, thickness 8 cm, white colour.

Protection bumper for docks, pontoons and for any protection application. Can also be mounted on masts and slightly rounded surfaces. Made of marine grade UV and salt resistant PVC.

PVC Dock wheel for dock corners Ø30cm H15cm to protect the hull of your boat when docking. Support not included. It allows for smooth docking.

25 cm protection guard for jetty sides and boats. Dimensions: length 250 mm, height 60 mm. Colour: white or blue.

25 cm protection guard for jetty sides and boats. Dimensions: length 500 mm, height 60 mm. Colour: white or blue.

JF3 Angled Dock Guard 250+250mm for corners and edges of boats and docks, blue.

B60 large compact bumper for berths, pontoons and haulage docks, manufactured in E.V.A. very strong expanded material, length 60 cm, height 35 cm, thickness 18 cm.

B70 modular and thin bumper for berths, pontoons, finger piers and haulage docks, manufactured in E.V.A. very strong expanded material, length 80 cm, height 14 cm, thickness 4 cm.

Bumper B80 straight model for berths, pontoons, finger piers and haulage docks, manufactured in E.V.A. very strong expanded material, length 85 cm, height 12 cm, thickness 8 cm.

Bumper B80 angled model for berths, pontoons, finger piers and haulage docks, manufactured in E.V.A. very strong expanded material, length 85 cm, height 12 cm, thickness 8 cm.

Bumper B90 straight model for berths, pontoons, finger piers and haulage docks, manufactured in E.V.A. very strong expanded material, length 95cm, height 18cm, thickness 12cm.

Bumper B90 angular model for berths, pontoons, finger piers and haulage docks, manufactured in E.V.A. very strong expanded material, length 95cm, height 18cm, thickness 12cm.

Bumper B100 for berths, pontoons, finger piers and haulage docks, manufactured in E.V.A. very strong expanded material, length 95cm, height 35cm, thickness 18cm.